12-12-2019, 11:15 AM | #15 | |
Drives: 2016 Camaro SS Join Date: Sep 2018
Location: Bartlett, TN
Posts: 1,121
|
Quote:
Please do, I'll be doing one soon and like this idea better than the idea of having to hold a switch. |
|
03-12-2020, 10:48 PM | #16 |
Drives: Chevrolet Camaro SS Join Date: Mar 2020
Location: Mesa, AZ
Posts: 1
|
2 step help ?
I got a 17 Camaro SS auto and I can’t get the 2 step to turn on the red light on the box only turns on when I turn off the car for a second then goes away? Do I need plug it in thru the brake or should I try a new switch? I feel like the switch I got isn’t a good one?
|
03-13-2020, 07:53 AM | #17 |
Drives: 2019 Chevrolet SS Join Date: Mar 2019
Location: Houston, TX
Posts: 93
|
I have the lingenfelter rpm limiter/ timing box and plan to use it more for timing retarding for the nitrous kit, but going to set the rpm limiter just for fun to make noise on a rocker switch that i can turn on or off. I believe most of these boxes require a positive 12v signal on the input wire to activate.
|
03-13-2020, 12:28 PM | #18 |
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 702
|
I'm getting close to installing my 2 step. Converter is going in this weekend.
__________________
2016 Turbo Camaro SS - 800hp/900tq 9.7@146
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
04-07-2020, 10:21 AM | #19 |
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 702
|
I installed the msd 2 step using the brake pedal in an Auto.
https://www.camaro6.com/forums/showt...=554303&page=6
__________________
2016 Turbo Camaro SS - 800hp/900tq 9.7@146
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
|
|
Post Reply
|
|
|