04-19-2018, 02:26 PM | #1 |
Max Camber on a non 1LE?
If my shoulder isn't completely toast(long story) I hope to be at VIR at the end of May(Memorial day) for the 3 day PCA event.
The HP Supp says to run -2.0 camber in the front, but what is the max a non 1LE ZL1 can achieve? I'm hoping it will get to at least -2.25 as any more than that and the car may not drive well on the highway at least from my past experience from other cars.
__________________
2018 ZL1 - Garnet Red, NO Sunroof, A10, PDR, Carbon hood insert = Perfect
|
|
04-19-2018, 11:04 PM | #2 |
Drives: 2017 ZL1 A10 Vert Join Date: Jan 2018
Location: Texas
Posts: 56
|
I have a 17 Zl1 Vert and get -2.3 camber in fronts. 3/16 -1/4 clearance between wheels and struts. Toe will also have to be adjusted when changing camber. At -2.3 on highway at 70mph it doesn’t ride bad. Steering feels a little more responsive to steering input. Don’t know about highway tire wear at -2.3 cause I only drive 20miles to track at this setting. Hope this helps.
|
04-22-2018, 07:25 AM | #3 |
Yeah that’s great. Yes I’m aware of the toe change, will have the whole car aligned.
__________________
2018 ZL1 - Garnet Red, NO Sunroof, A10, PDR, Carbon hood insert = Perfect
|
|
04-22-2018, 08:44 AM | #4 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
Max on my ZL1 was -2.3° front but it didn't feel right. I backed it off to -2.0° and it feels much better. I may be at the same event at VIR.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
04-22-2018, 07:01 PM | #5 |
Good feedback, thanks guess I’ll stick with the factory recommendation for the maiden voyage. I’ll let you know by the end of the week if I’m 100% going. Will depend on on my shoulder MRI and Ortho follow up.
__________________
2018 ZL1 - Garnet Red, NO Sunroof, A10, PDR, Carbon hood insert = Perfect
|
|
|
|
Post Reply
|
|
|