You are browsing camaro5 
 |
|
03-03-2013, 11:58 PM
|
#1 | |
 Drives: Camaro SS 2013 / Tahoe LTZ 2009 Join Date: Feb 2013
Location: Kuwait
Posts: 73
|
Electric Exhaust Cutouts ?
Hi everybody
so i heard about some exhaust cutouts that will gain some HP & TQ and the exhaust will be loud and mean. but whenever you want to be quit it'll be back to it original sound this is a video i saw and it's interesting thing for me can't believe that this is s stock exhaust for camaro  so my question is that is this cutouts good or bad ? |
|
|
|
|
03-04-2013, 01:21 AM
|
#2 |
          Drives: pleather and Chiclets Join Date: Mar 2012
Location: a line somwhere
Posts: 4,206
|
its fine and gives you a sort of mild to wild controller...just straight exhaust that dumps out after the cats and loud or a very quiet mild catback
__________________
|
|
|
|
|
03-04-2013, 06:13 AM
|
#3 |
|
AKA "Beefcake"
Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009
Location: Indy
Posts: 8,529
|
No HP or TQ gain, just good, fun, loud exhaust.
|
|
|
|
|
03-04-2013, 09:49 AM
|
#4 |
|
I have those same cutouts installed in the same place. Yes, there a blast and will completely change the sound of the car. You will not gain any HP or TQ. In fact, on my car, it actually feels like you lose some TQ with them fully open. This is just a feeling and I have no evidence to back this up.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
 |
|
|
|
|
03-04-2013, 09:57 AM
|
#5 |
|
Chu no guat a hasa is?
Drives: 14 Jeep G Cherokee Overland HEMI Join Date: Jun 2011
Location: Some where in So Cal
Posts: 4,273
|
These sound real nice.
__________________
11 2SS/RSL99No Longer Stock (Sold) 6/19/14:AAC Plasma DRL's | Plug n play harness | Elite CC | Tint: 35% & 5% | LED Dome light | Show-N-Go Plate Holder | Flowmaster AT | C.A.I. Intake | VMAX CNC Spiral Ported TB | Husky Splash Guards
 |
|
|
|
|
03-04-2013, 10:40 AM
|
#6 |
|
Guardians Of The Night
|
I want some of these SO bad, love the sound
__________________
2013 ZL1 Crystal Red Tintcoat, Stock...for now
1968 SS/RS 396- being resurrected. 2011 SS LS3-Cammed, bolt-ons.(SOLD) |
|
|
|
|
03-04-2013, 10:56 AM
|
#7 | |
|
Drives: Camaro SS 2013 / Tahoe LTZ 2009 Join Date: Feb 2013
Location: Kuwait
Posts: 73
|
this video really made my mind
i guess it worth a shot |
|
|
|
|
|
03-04-2013, 01:32 PM
|
#8 |
|
|
If your going to get cutouts, I would get the ones from QTP. I was originally going with DMH, but my shop informed me that they have been having problems with them again and were going to change over to QTP. Something to think about. Also, the QTP cutouts use a bigger switch vs. the low profile switch of the DMH cutouts. So if you planed to install the switch in your console power port, your going to have to change locations or get another switch.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
|
|
|
|
03-04-2013, 02:39 PM
|
#9 |
 
Drives: 2010 2SS/RS Join Date: Jul 2011
Location: Mansfield Ohio
Posts: 267
|
I would say the only way you will make power by adding these are if you move/put them in front of your Cats. So when its open its free.. but seeing how your cats are so close good luck with moving them back to put the cutouts on!!
__________________
TSP VVT2, OBX LTs Catless mids, Flowmaster, Half K&N, Half Fastlane Pipeline CAI, Tuned by RDP Motorsports! Thats the main fun adders
SHAKE ANNNNNNND BAKE!!!!! |
|
|
|
|
03-05-2013, 11:42 AM
|
#10 | |
|
OMINOUS
Drives: '10 Camaro 2SS/RS M6 Join Date: Dec 2012
Location: Lincoln, Nebraska
Posts: 223
|
I bought some Noweeds cutouts, have yet to install them. They did dyno test with them open and closed. You gain about 18 RWHP with them open on a L99. Of course these were also ones that were cut to fit. Mine that I bought match right up to my ARH LT's. Thought I'd share that.
|
|
|
|
|
|
03-05-2013, 12:15 PM
|
#11 |
|
Drives: Camaro SS 2013 / Tahoe LTZ 2009 Join Date: Feb 2013
Location: Kuwait
Posts: 73
|
much thnx for the confirming that eric
 and loved the sound |
|
|
|
|
03-05-2013, 04:47 PM
|
#12 |
 
Drives: 2010 camaro ss Join Date: Jul 2010
Location: Utah
Posts: 352
|
I just sent an email to NOWEEDS as to their Cutouts. This seems the way to go as you have zero welding which in my opinion is huge considering the ease of install and not having to find or worry about a good installer.
They are more than double the price of QTP's. We are thinking of putting these on th NAPA Camaro. Will keep up to date on this. |
|
|
|
|
03-05-2013, 05:11 PM
|
#13 |
Drives: '11 SW 1LT RS Join Date: Aug 2012
Location: Granite Bay, CA
Posts: 717
|
Ya I am interested in a no weld solution. Do you just cut out a section of pipe and slide them on?
__________________
 |
|
|
|
|
03-05-2013, 06:54 PM
|
#14 |
|
Drives: 2010 camaro ss Join Date: Jul 2010
Location: Utah
Posts: 352
|
Here is their website with a video showing a complete install.
Looks like the way to go in my opinion. http://www.noweeds.net/ |
|
|
|
|
|
|
|
 |
|
|
