02-15-2019, 11:01 AM | #1 |
Drives: 18 2SS 1LE NFG Join Date: Aug 2018
Location: Mansfield
Posts: 133
|
Lift pads
Posted on the general forum but has anyone made there own lift pads and if so can you share the dimensions so I can make my own. Dont want to spend 80.00 when i can machine them myself. Just haven't been able to measure it out myself
|
02-15-2019, 03:22 PM | #2 |
Drives: 2018 2SS 1LE Join Date: Nov 2018
Location: Montreal, Quebec, Canada
Posts: 2
|
Just mesure it
|
02-15-2019, 07:12 PM | #3 |
Drives: 18 2SS 1LE NFG Join Date: Aug 2018
Location: Mansfield
Posts: 133
|
|
02-17-2019, 12:58 PM | #4 |
Drives: 2018 2SS 1LE Join Date: Dec 2018
Location: Ontario
Posts: 8
|
Ordered these yesterday... Cheaper than ZL1Addons
https://www.amazon.com/Dewhel-Billet...CHPC2KRHKAZ418 |
02-18-2019, 07:12 AM | #5 | |
Quote:
|
||
02-19-2019, 03:13 AM | #6 |
Drives: 18 2SS 1LE NFG Join Date: Aug 2018
Location: Mansfield
Posts: 133
|
I just got the blocks machine out so just rectangles and no slots, should I cut the slot smaller than 5/16" or 8mm. I havent been under the car with micrometer yet so wasnt sure the exact width of the pinch weld.
|
02-19-2019, 08:51 AM | #7 |
Drives: Fastish Join Date: Jan 2019
Location: Florida
Posts: 228
|
You can definitely cut the slots narrower... Probably almost half
|
02-21-2019, 12:25 AM | #8 |
Drives: 2018 SS 1LE Join Date: Mar 2018
Location: FL
Posts: 123
|
Figured Id ask here rather than starting a new thread as it is related. Did yall's cars come with a lug jut wrench or a jack stand? Recently I went to go install a set of locking lug nuts and couldnt find a lug nut wrench.
|
02-21-2019, 01:51 AM | #9 |
Drives: 18 2SS 1LE NFG Join Date: Aug 2018
Location: Mansfield
Posts: 133
|
No mine just came with an inflation kit and tow hook.
|
|
|
Post Reply
|
|
|