01-04-2019, 08:15 PM | #1 |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Orlando
Posts: 1,617
|
HPTuners fails to read?
Greetings all.
1st foray into HPTuners. Have updated software and firmware, resynced interface... It will connect and log no problem, but when I try to read the OEM tune, I get a ‘failed’ message. What am I missing? FYI - car is running when trying to read.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
01-04-2019, 08:23 PM | #2 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,092
|
I must admit...I've never attempted while the car is running. I push the start button (foot off the brake) until everything lights up. Then read the vehicle. Then do a save as.
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
01-04-2019, 09:04 PM | #3 |
BAMF SS
|
This is going to sound dumb.... but are you connected to the internet/wifi on your computer?
IIRC it's either the first time you read it or the first time you flash it, you have to be connected to the interwebz on your computer.
__________________
2016 1SS A8: FBO + Circle D + P1X + Meth + Tuned by Pray Performance
Stock Longblock 800 SAE rwhp. 9.4 @ 145 mph. |
01-04-2019, 10:05 PM | #4 |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Orlando
Posts: 1,617
|
So...FYI.
You can't read/write when the car is running. Accessory mode only. I knew that from other cars I have tuned, but totally spaced it here. All is good. BTW - Pray Performance for the win!
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
|
|
Post Reply
|
Thread Tools | |
|
|