11-16-2018, 12:35 PM | #1 |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Orlando
Posts: 1,618
|
This ok with RotoFab?
I believe the Roto-Fab seals using the hood.
Is this ok? Came this way out of the box. Thanks in advance.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
11-18-2018, 12:19 PM | #2 |
Drives: 2018 SS 1LE Join Date: Aug 2018
Location: Portland
Posts: 18
|
Probably not ideal but I doubt it makes very much of a difference. Only a tiny bit of air is going to come in through that divot.
|
11-18-2018, 03:27 PM | #3 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
It will probably seal up just fine. If it doesn't let Mike know and they'll probably just send you another.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-18-2018, 11:19 PM | #4 |
Drives: 16 Camaro SS w/ Roto-fab CAI Join Date: May 2009
Location: Arizona
Posts: 2,682
|
You can pull up on the hood seal slightly disengaging it from the air box. That should fix the wrinkle in the rubber seal.
|
|
|
Post Reply
|
|
|