JRE smooth idle cam

L78toLT1 · 04-23-2019, 06:37 AM

Hey guys, I finally cracked the code and linked my Jannetty Racing Smooth Idle Cam video. I'm an old guy and the 25mb email size limit had me scratching my head on this one!
I hope it's worth the wait, I know several guys have been patiently waiting to hear this cam in action! It is certainly as advertised i.e. it is very smooth. Just slightly more aggressive than stock. In person the difference vs stock is slightly more perceptible than in the video.

https://youtu.be/g9SITn8jdYw

Dysan911 · 04-23-2019, 06:42 AM

Wow that is smooth!. I would never even know it has a cam from hearing that. What exactly does this cam offer? Fuel?

L78toLT1 · 04-23-2019, 07:12 AM

Quote:

Originally Posted by Dysan911

Wow that is smooth!. I would never even know it has a cam from hearing that. What exactly does this cam offer? Fuel?

Maybe Ted will chime in to better address your question. I'm not sure of the specs, but I know the cam has a 32% fuel lobe and quite a bit more lift and duration but, apparently not a lot of lobe separation. Ted insisted that it will perform virtually identically to his rough idle cam, except of course at idle.

As I stated, it's a little more noticeable in person. I think I'm going to like it, it's definitely more stealthy.

This cam will definately make my life easier when I get bored and decide to sell the car to start my next project. I can de-mod and go back stock except for the cam to trade the car and the dealer would be none the wiser. I know from prior experience that dealers, and most individuals don't want anything to do with a car with an aggressive lope

laynlo15 · 04-23-2019, 07:46 AM

Sound pretty good. When will you get it dyno tuned or are you just going to use Ted's street tune

L78toLT1 · 04-23-2019, 07:57 AM

Quote:

Originally Posted by laynlo15

Sound pretty good. When will you get it dyno tuned or are you just going to use Ted's street tune

I'm going to break it in for a couple hundred miles, then work with Ted on remote tuning. I've got to say, it appears that he has it dialed in pretty good already. I can't imagine that it will perform much better much better after logging & tuning.
I haven't run any e85 yet either, I'm hoping I will have enough high & low side fuel that I don't have to bother mixing.

KingLT1 · 04-23-2019, 08:45 AM

Sounds good...I bet the idle can be lowered a touch and it will sound a little more aggressive if desired.

L78toLT1 · 04-23-2019, 09:48 AM

Quote:

Originally Posted by KingLT1

Sounds good...I bet the idle can be lowered a touch and it will sound a little more aggressive if desired.

Yeah, probably so. I was thinking of lowering it a bit just to see how it sounds.

EDFHOBBIES · 04-23-2019, 02:59 PM

If you would of posted a few months earlier dang! I went with the GT32 lingenfelter.. because I saw a small video of a little rougher idle from the smooth idle.. I'm sure you can add 100 or 150 rpm and smooth it out more but, I didn't want to take a chance also I used there pump and they have a 44% lobe over the 32 or 38 standard! on e85 got her to 900..

Sounds great really identical from 2 different specs!

Drsagacity · 04-26-2019, 01:21 PM

Decisions, decisions...I love that setup...but every time I get in the Camaro and hear the little lope, it makes me smile. On my other LT1 I am going for calmer setup...this might be the ticket. Smooth idle, add fuel, bump to 8psi and 715whp. Bam! Daily driver set.

oldman · 04-29-2019, 03:31 PM

after a year and 1/2 my cam got really smooth, I want a bigger one now! Strange how mean it sounded, now it sounds tame as a kitten... Heck I want the Cam Motion "lil'loop" truck cam now....

Drsagacity · 04-29-2019, 03:48 PM

Quote:

Originally Posted by oldman

after a year and 1/2 my cam got really smooth, I want a bigger one now! Strange how mean it sounded, now it sounds tame as a kitten... Heck I want the Cam Motion "lil'loop" truck cam now....

I know what you are saying. My cam seems to be smoothing out too. Here is my daughter revving it.

https://youtu.be/MTYVp589qI0
For comparison, this is the JRE Rough idle cam...

oldman · 04-30-2019, 12:30 PM

Tame, heck that is an "Oldman"cam, like a Camry or sum'ting. LOL.

Epx998 · 04-30-2019, 03:54 PM

I wouldn't get 1 mile where i live with that cam without getting pulled over. Sounds nice.

Drsagacity · 04-30-2019, 08:33 PM

Quote:

Originally Posted by Epx998

I wouldn't get 1 mile where i live with that cam without getting pulled over. Sounds nice.

Ha! I love the muscle car sound with the Camaro. However, I am leaning toward the smooth idle cam for the Vette.

04-23-2019, 06:37 AM	#1
L78toLT1 Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017 Location: North Ga Posts: 1,786	JRE smooth idle cam Hey guys, I finally cracked the code and linked my Jannetty Racing Smooth Idle Cam video. I'm an old guy and the 25mb email size limit had me scratching my head on this one! I hope it's worth the wait, I know several guys have been patiently waiting to hear this cam in action! It is certainly as advertised i.e. it is very smooth. Just slightly more aggressive than stock. In person the difference vs stock is slightly more perceptible than in the video. https://youtu.be/g9SITn8jdYw __________________ Baby Blue 2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned

04-23-2019, 06:42 AM	#2
Dysan911 Drives: 2017 50th Anniversary 2SS Join Date: Sep 2016 Location: Jacksonville, FL Posts: 930	Wow that is smooth!. I would never even know it has a cam from hearing that. What exactly does this cam offer? Fuel? __________________ Former Ride: 17 Camaro 2SS, M6 - Fifty \| Procharger P1SC \| 3.7 Pulley \| Stage 2 IC \| Race Bypass \| DSX FF Kit \| JRE Custom E85 Flex Fuel Tune \| LT4 Fuel System \| JMS Voltage Booster \| MSD Plug Wires \| American Racing 1-7/8's LT Headers Full System Catback \| Baro Breakout Harness \| LT4 Map Sensor \| Katech Ported TB \| MMS Oil Catch Can \| 160 Thermo \| Solo Performance J-Pipes

04-23-2019, 07:46 AM	#4
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Sound pretty good. When will you get it dyno tuned or are you just going to use Ted's street tune __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

04-23-2019, 08:45 AM	#6
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,793	Sounds good...I bet the idle can be lowered a touch and it will sound a little more aggressive if desired. __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

04-26-2019, 01:21 PM	#9
Drsagacity Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018 Location: Swansea, IL Posts: 1,219	Decisions, decisions...I love that setup...but every time I get in the Camaro and hear the little lope, it makes me smile. On my other LT1 I am going for calmer setup...this might be the ticket. Smooth idle, add fuel, bump to 8psi and 715whp. Bam! Daily driver set. __________________ 2017 Camaro 2SS vert - Nightfall Gray Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance Last edited by Drsagacity; 04-26-2019 at 04:53 PM.

04-29-2019, 03:31 PM	#10
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	after a year and 1/2 my cam got really smooth, I want a bigger one now! Strange how mean it sounded, now it sounds tame as a kitten... Heck I want the Cam Motion "lil'loop" truck cam now.... __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

04-30-2019, 12:30 PM	#12
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	Tame, heck that is an "Oldman"cam, like a Camry or sum'ting. LOL. __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

04-30-2019, 03:54 PM	#13
Epx998 \|Engineer\| Drives: 2016 Camaro SS Join Date: Aug 2016 Location: San Jose, CA Posts: 402	I wouldn't get 1 mile where i live with that cam without getting pulled over. Sounds nice. __________________ 2016 Camaro SS A8 \| Magnuson Heartbeat \| Might Mouse Wild Catch Can \| DSX Flex Fuel \| Eibach Pro Kit \| Flowmaster Outlaw Black Series \| MRR 017 Wheels

User Name		Remember Me?
Password