08-22-2017, 12:35 PM | #1 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Meth injection nozzle placement
Where is everyone placing their nozzles for meth? The intake tract is not long at all we barely have room to mount them on a flat surface. Additionally I'm getting a Whipple supercharger and must use the stock accordion elbow piece to connect from CAI to throttle body and that creates even less room to mount nozzles to a hard surface. Direct port meth is not an option with the Whipple either.
|
08-22-2017, 08:20 PM | #2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Down low on the intake tube is where I put mine.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
08-22-2017, 08:43 PM | #3 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
I see what you mean. A local shop that did this one on a LT4 had hard plastic vs what I have.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
08-22-2017, 08:44 PM | #4 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
one more pic
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
08-22-2017, 08:46 PM | #5 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Supposedly the RotoFab elbow can be trimmed to fit with the Whipple blower but still at an odd angle per Whipple directly but I don't have any of those parts here yet to check myself.
|
08-22-2017, 08:50 PM | #6 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Yeah mine... No clue!
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
08-22-2017, 09:33 PM | #7 |
Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
I placed after TB. It is not the best place, but no choice. |
08-22-2017, 10:49 PM | #8 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
What adapter after the throttle body is that nozzle attached to?
Definitely a good idea to use a throttle body plate from a nitrous kit. I'm going to research it thanks. Last edited by djfury05; 08-22-2017 at 11:24 PM. |
08-23-2017, 02:38 AM | #9 |
Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
http://www.snowperformance.net/Camar...te-p/40072.htm
It is for 5gen Camaro, but when I asked , they said it fit on 6gen,too |
08-23-2017, 05:55 AM | #10 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I have the AEM shown above. Works great.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
08-23-2017, 08:04 AM | #11 | |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Quote:
How's is yours running since you added meth? You doing 100% meth? What were your gains? Thanks
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
|
08-23-2017, 09:02 AM | #12 | |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Quote:
|
|
08-23-2017, 09:04 AM | #13 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
|
08-23-2017, 05:50 PM | #14 |
"Lohla"
|
I'm running it in the elbow of the Roto-Fab CAI. It sprays directly back into the TB
__________________
OG Trans and Diff but all else is upgraded. Twins bring wins ;-)
|
|
|
Post Reply
|
|
|