08-03-2023, 10:35 AM | #1 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
HUD RPM Shift Red Light
I need a red shift light lower than the default. Can I adjust the HUD shift red light currently set at 6500?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
08-03-2023, 11:33 AM | #2 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,678
|
Not adjustable with anything I’m aware of.
Not sure what module drives it. It would be great if hpt could get to it
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
08-03-2023, 01:13 PM | #3 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
Pretty much has to be an ECU field. I could always buy a Phastek shift light but that seems redundant.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
08-03-2023, 03:50 PM | #4 |
Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018
Location: Canton, GA
Posts: 405
|
Are you manually shifting your car?
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)
Built by Vengeance Racing, tuned by Elite Tuned |
08-03-2023, 04:09 PM | #5 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
Yea, I sometimes run 100 octane with a 104 tune, and 100 won't show any spark or advance events as long as I shift 6200-6400 which is my peak HP range. But using the HUD is not the best.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
08-04-2023, 11:17 AM | #6 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
I just went out in manual, and attempted shifting via the HUD at 6200, and did a 4/5 at 6450 and 5/6 at 6350 with no spark or advance events. I ordered a shift light.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
|
|
Post Reply
|
|
|