Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > 5th Gen Camaro SS LS LT General Discussions


Reply
 
Thread Tools
Old 05-25-2016, 07:22 AM   #1
Slilly20102ss
 
Slilly20102ss's Avatar
 
Drives: 2010 2ss/rs
Join Date: Jan 2016
Location: Cincinnati
Posts: 147
Quick question

Could I run 275/40r/20 Goodyear eagle sport tire on the front of my 2010 camaro .I have heard of some doing this
__________________
Roto fab,stainless power works long tube headers,atak cat back exhaust,cat delete and dyno steve custom tune.
Slilly20102ss is offline   Reply With Quote
Old 05-25-2016, 07:30 AM   #2
Bulldog3071

 
Bulldog3071's Avatar
 
Drives: 2010 Camaro 2SS/RS LS3
Join Date: Oct 2013
Location: Kernersville, NC
Posts: 931
depends on width of wheel, good thread on site regarding wheel size and proper fire I run a 285/35/20 on a 10 inch wheel and fits fine
__________________
Hurst Short Throw Shifter, K&N CAI, SRP Racing Pedals, GM Performance Exhaust, GM GFX Package
Lakewood Strut Tower Brace, JBA Shorty Headers, JBA 8 MM Wires, Airaid TB Spacer, Phastek CAI Scoop, Washer Bottle Relocation Kit, Stainlees Steel Brake Lines, Brake Performance Slotted and Drilled Rotors, BMR Tunnel Brace, BMR Trailing Arms, BMR Subframe Connectors, Borla ATAK Muffelers, Z28 Wickerbill Spoiler, VTC, Bow Tie Delete, BMR Adjustable Front Swaybar, BMR End Link Kit, BMR Extreme Rear Anti-Roll Kit, Diablo I1000 "InTune"
Bulldog3071 is offline   Reply With Quote
Old 05-25-2016, 07:54 AM   #3
PROZ11
 
PROZ11's Avatar
 
Drives: 2012 RS/2SS, 69 ProStreet Camaro
Join Date: Oct 2011
Location: North NJ
Posts: 478
It's also going to depend on what size tire you are running on the rear.

.
__________________
PROZ11 is offline   Reply With Quote
Old 05-25-2016, 07:55 AM   #4
Slilly20102ss
 
Slilly20102ss's Avatar
 
Drives: 2010 2ss/rs
Join Date: Jan 2016
Location: Cincinnati
Posts: 147
Stock wheels and same tire front and back
__________________
Roto fab,stainless power works long tube headers,atak cat back exhaust,cat delete and dyno steve custom tune.
Slilly20102ss is offline   Reply With Quote
Old 05-25-2016, 09:06 PM   #5
Slilly20102ss
 
Slilly20102ss's Avatar
 
Drives: 2010 2ss/rs
Join Date: Jan 2016
Location: Cincinnati
Posts: 147
Thanks for the info
__________________
Roto fab,stainless power works long tube headers,atak cat back exhaust,cat delete and dyno steve custom tune.
Slilly20102ss is offline   Reply With Quote
Old 05-25-2016, 10:25 PM   #6
LT1Zob

 
LT1Zob's Avatar
 
Drives: 23 LT1 / 19 Z06 / after 6 5th gens
Join Date: Jan 2014
Location: MI
Posts: 1,984
Quote:
Originally Posted by Sanjay Collins View Post
The factory 20" wheels are 8" for the front and 9" for the rear. To run 275s up front you'd have to buy another set of the factory 9" rear wheels. A lot of people do this to run a square setup without buying a whole new set of wheels. 245 is the safest max tire width for an 8" wheel, but some say a 255 is the absolute max for an 8" wheel.
THIS. ^^

Dont worry about rubbing. My stock wheels are 10" upfront, 11" rear with 285 35s all around. But what Sanjay said is hands down most cost effective. That will give you a square setup you can rotate too with 9s all around
__________________
"Make yourself sheep and the wolves will eat you"
LT1Zob is offline   Reply With Quote
 
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:15 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.