1LE Side Skirts (Again)

jebfour · 11-30-2019, 02:55 PM

I’ve been reading though these threads and when I click on (or research) the suggestions, I get “no longer available” or “on hold”, etc. To that end, I ask those of you here this question:

Who is currently offering high quality side skirts that do not need to be painted and match the black trim of a 2018 1LE? If it matters, I’m using ZL1 Add-Ons rock guards.

Thanks in advance and links are appreciated!

Warrior102 · 11-30-2019, 03:38 PM

I purchased some crap on eBay that didn't fit, wasted $300. I ended up getting the ACS in 1LE black and they fit and look great. They are not cheap but neither was the car. I had the rock guards on also but removed them after putting on the side skirts, the rear will be fine but you'll have to do some trimming to get the front on. I was going to do this but the combination of PS4S tires and the side skirts have pretty much eliminated the paint damage. https://www.phastekperformance.com/2...s-48-4-039.htm

DaveC113 · 11-30-2019, 04:01 PM

I also went with ACS... made in USA, they fit, etc... worth the extra cash imo. I also used the ACS front rock guards, I had the ZL1 guards but they look like crap in comparison. ZL1s would fit with the ACS rockers though, if you didn't feel like changing them out right now.

I got the primered ones, local body shop charged $100 to paint them black and another $100 to install. They would have charged $300 if I wanted a base/clear finish that I believe ACS also charges $300 for. I don't think a base/clear is needed to match the 1LE black, and figure they are going to get beat up anyways.

ZL1Jetsfan · 11-30-2019, 11:48 PM

Quote:

Originally Posted by DaveC113

I also went with ACS... made in USA, they fit, etc... worth the extra cash imo. I also used the ACS front rock guards, I had the ZL1 guards but they look like crap in comparison. ZL1s would fit with the ACS rockers though, if you didn't feel like changing them out right now.

I got the primered ones, local body shop charged $100 to paint them black and another $100 to install. They would have charged $300 if I wanted a base/clear finish that I believe ACS also charges $300 for. I don't think a base/clear is needed to match the 1LE black, and figure they are going to get beat up anyways.

Made in Canada 🇨🇦

JamesNoBrakes · 11-30-2019, 11:57 PM

I have the C7 ones, they look like a million bucks IMO.

In fact, I took this picture next to a ZL-1...not for this reason.

Chris C 1SS 1LE · 12-01-2019, 09:37 AM

I have C7 also. Installed in my garage.

jebfour · 12-01-2019, 11:11 AM

Thanks for the replies!

I was looking at the ACS skirts but didn’t an option for the 1LE color on their site (must have missed it). Thanks for the Phastek link!

The C7 skirts look great as well! Can you please put up a link? I want to make sure I’m looking at the right thing.

Ryanbabz71 · 12-01-2019, 08:40 PM

I have C7. I don’t believe they offer them in the satin/1LE color option anymore

Ryan B.

JamesNoBrakes · 12-01-2019, 10:54 PM

Quote:

Originally Posted by Ryanbabz71

I have C7. I don’t believe they offer them in the satin/1LE color option anymore

I saw it being offered on their site...but I know it was at least discontinued for a while. Supposedly the satin paint is much more expensive. Due to a mix-up, they actually got delivered to my workplace and my "cube". Was kind of humorous.

Tommy G · 12-02-2019, 08:02 AM

I went with ACS Composites in primer. Had a local body shop paint the rockers and ZL1 style splitter base/satin clear for $300. I also had the ZL1 Addons rockguards peviously installed, but decided to get the ACS rock guards as well, since the ZL1s were cracked. The ACS guards have held up better, and they look and fit much nicer.

11-30-2019, 02:55 PM	#1
jebfour Drives: 2018 1SS 1LE Join Date: Jun 2018 Location: Union County, NC Posts: 56	1LE Side Skirts (Again) I’ve been reading though these threads and when I click on (or research) the suggestions, I get “no longer available” or “on hold”, etc. To that end, I ask those of you here this question: Who is currently offering high quality side skirts that do not need to be painted and match the black trim of a 2018 1LE? If it matters, I’m using ZL1 Add-Ons rock guards. Thanks in advance and links are appreciated! __________________ Current 2018 1SS / 1LE Previous 1967 w/ 327 & M21 1968 w/ 302 & M21 1968 RS/SS w/ 383 & M22 1986 IROC Z

11-30-2019, 03:38 PM	#2
Warrior102 Drives: 2018 2SS 1LE Black Join Date: Aug 2018 Location: Cape Cod Posts: 638	I purchased some crap on eBay that didn't fit, wasted $300. I ended up getting the ACS in 1LE black and they fit and look great. They are not cheap but neither was the car. I had the rock guards on also but removed them after putting on the side skirts, the rear will be fine but you'll have to do some trimming to get the front on. I was going to do this but the combination of PS4S tires and the side skirts have pretty much eliminated the paint damage. https://www.phastekperformance.com/2...s-48-4-039.htm Last edited by Warrior102; 11-30-2019 at 03:48 PM.

11-30-2019, 04:01 PM	#3
DaveC113 Drives: 2018 Camaro 1SS 1LE Join Date: Sep 2018 Location: Front Range, CO Posts: 1,859	I also went with ACS... made in USA, they fit, etc... worth the extra cash imo. I also used the ACS front rock guards, I had the ZL1 guards but they look like crap in comparison. ZL1s would fit with the ACS rockers though, if you didn't feel like changing them out right now. I got the primered ones, local body shop charged $100 to paint them black and another $100 to install. They would have charged $300 if I wanted a base/clear finish that I believe ACS also charges $300 for. I don't think a base/clear is needed to match the 1LE black, and figure they are going to get beat up anyways. __________________

11-30-2019, 11:57 PM	#5
JamesNoBrakes Drives: 2SS 1LE Join Date: Oct 2011 Location: AK Posts: 2,299	I have the C7 ones, they look like a million bucks IMO. In fact, I took this picture next to a ZL-1...not for this reason. Attached Images __________________ Everything happens for a reason, except when it doesn't, but even then, you can, in hindsight, fabricate a reason that satisfies your belief system. 2018 2SS 1LE 2023 Colorado ZR2 2022 Stinger GT-line AWD

12-01-2019, 09:37 AM	#6
Chris C 1SS 1LE Drives: 2017 1LE Join Date: Nov 2017 Location: Brooks, GA Posts: 697	I have C7 also. Installed in my garage. Attached Images __________________ '17 Bright Yellow 1LE. PDR, STB, !CAGS Borla 60606, 11925. Tony Mamo ported TB, ROTOFAB, !Sound Tube

12-01-2019, 11:11 AM	#7
jebfour Drives: 2018 1SS 1LE Join Date: Jun 2018 Location: Union County, NC Posts: 56	Thanks for the replies! I was looking at the ACS skirts but didn’t an option for the 1LE color on their site (must have missed it). Thanks for the Phastek link! The C7 skirts look great as well! Can you please put up a link? I want to make sure I’m looking at the right thing. __________________ Current 2018 1SS / 1LE Previous 1967 w/ 327 & M21 1968 w/ 302 & M21 1968 RS/SS w/ 383 & M22 1986 IROC Z

12-01-2019, 08:40 PM	#8
Ryanbabz71 Drives: 2018 Hyper Blue 1SS 1LE Join Date: Jul 2011 Location: Brownsburg, Indiana Posts: 6,230 View My Garage	I have C7. I don’t believe they offer them in the satin/1LE color option anymore Ryan B. __________________ Ryan * 2018 1SS 1LE Camaro Hyper Blue Metallic Car Build: http://www.camaro6.com/forums/showth...0#post10049680

12-02-2019, 08:02 AM	#10
Tommy G Drives: 18 1LE/1SS, 08 G8 GT, 13 GTI Join Date: May 2017 Location: Davenport, IA Posts: 56	I went with ACS Composites in primer. Had a local body shop paint the rockers and ZL1 style splitter base/satin clear for $300. I also had the ZL1 Addons rockguards peviously installed, but decided to get the ACS rock guards as well, since the ZL1s were cracked. The ACS guards have held up better, and they look and fit much nicer.

User Name		Remember Me?
Password