10-11-2018, 10:05 AM | #1 | |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,472
|
Cool in cabin video
Front tires wore hence alot of steering input .
best time 1.30.8 |
|
10-12-2018, 12:32 PM | #2 |
Drives: 2018 1SS 1LE Join Date: Jun 2018
Location: Union County, NC
Posts: 56
|
Nice vid as always.
What setup are you using so that you can use the harness with the stock seat?
__________________
Current
2018 1SS / 1LE Previous 1967 w/ 327 & M21 1968 w/ 302 & M21 1968 RS/SS w/ 383 & M22 1986 IROC Z |
10-13-2018, 08:48 AM | #3 | |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,472
|
Quote:
So I use to run stock seat with 4 point and Brey Krause harness bar but I got tossed around WAY to much! Now I have Recaro seat found below with 6 point harness also found below. The Planted seat bracket makes it all a snap to bolt right up to stock locations! 070.86.UU11 (Recaro) Recaro Profi XL Seat - Velour Black Bolster, Velour Black Insert, White Logo, 3/4/5/6 Point Belt $1,099.00 0.00% $1,099.00 $1,099.00 1 PAOSSM-G (Planted) Planted Aluminum Offset Universal Side Mount- Grey $109.95 0.00% $109.95 $109.95 1 SMHK (Planted) Planted Side Mount Hardware Kit $6.00 0.00% $6.00 $6.00 1 0.70.9NT (Recaro) Recaro Seat Slider (inside bar, without tabs) $135.00 0.00% $135.00 $135.00 1 SB284DR (Planted) Planted Seat Bracket- Chevrolet Camaro [6th Generation] (2016+) - Driver $140.00 0.00% $140.00 $140.00 1 SHK (Planted) Planted Seat Hardware Kit $12.00 |
|
10-13-2018, 09:44 AM | #4 |
Drives: 2018 1SS 1LE Join Date: Jun 2018
Location: Union County, NC
Posts: 56
|
Thanks for your reply! I’ll check all of this out.
__________________
Current
2018 1SS / 1LE Previous 1967 w/ 327 & M21 1968 w/ 302 & M21 1968 RS/SS w/ 383 & M22 1986 IROC Z |
10-15-2018, 08:20 AM | #5 |
Drives: ISO ss 1le Join Date: May 2018
Location: FL
Posts: 764
|
Nicky - I see you're using the suction cup mount for the Aim, i bought one of these to test out, and it works very well. Keeps the already small vision clear.
https://www.proclipusa.com/product/p...ter-dash-mount I'll get a pic of my setup. |
10-15-2018, 08:24 AM | #6 |
Drives: ISO ss 1le Join Date: May 2018
Location: FL
Posts: 764
|
Also, did you add a socket for your 12V, if so where?
|
10-15-2018, 05:02 PM | #7 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,472
|
So I bought the AIM DL Color version. There is a cable that runs from the OBD II port to the AIM unit. The OBD II port has 12v so the unit is always fully charged. I can run without the cable as the unit has rechargeable batteries. The advantage of the cable is I data log PIDs off the stock ECU. I can then watch and graph brake pressure and others thru out the track session. The AIM comes with a bracket that attaches to the magnets found in the main unit. I would need to attach that bracket to that cool setup that you have. Is your mounting surface steel for the magnets to attach to?
THANKS! |
10-16-2018, 07:58 AM | #8 | |
Drives: ISO ss 1le Join Date: May 2018
Location: FL
Posts: 764
|
Quote:
|
|
10-16-2018, 08:13 AM | #9 |
Drives: 1LE Join Date: Sep 2017
Location: East Coast
Posts: 1,472
|
|
02-06-2019, 01:11 AM | #10 | |
Drives: Track prepped 2018 Camaro ZL1 (a10) Join Date: Aug 2013
Location: Victoria B.C. Canada
Posts: 1,384
|
Quote:
Sorry can't google it, long story...
__________________
2018 ZL1; Mag 2650 and 2 inch LT Headers , every SPL suspension upgrade, MCS 2 way coilovers, sway bars, square SC3R 325's all the way around, and multiple brake cooling upgrades
|
|
02-06-2019, 01:31 AM | #11 |
Drives: 2017 1SS/1LE Join Date: Sep 2016
Location: FL Panhandle
Posts: 1,559
|
|
02-06-2019, 01:55 AM | #12 |
Drives: Track prepped 2018 Camaro ZL1 (a10) Join Date: Aug 2013
Location: Victoria B.C. Canada
Posts: 1,384
|
16lbs is light! Thanks for such a quick reply, I appreciate you looking that up for me
__________________
2018 ZL1; Mag 2650 and 2 inch LT Headers , every SPL suspension upgrade, MCS 2 way coilovers, sway bars, square SC3R 325's all the way around, and multiple brake cooling upgrades
|
02-06-2019, 11:09 AM | #13 |
Drives: ZL1 1LE Join Date: Oct 2016
Location: California
Posts: 1,297
|
Would that clip mount work on the other side of the gauge cluster?
__________________
|
02-06-2019, 11:27 AM | #14 |
Drives: '19 2SS M6. Join Date: Aug 2018
Location: CT
Posts: 340
|
Thunderbolt is a great track....did many laps there but on a motorcycle.
Love watching the track from another view. Those are great times!
__________________
2019 2SS, Shadow gray, 6mt, NPP, Magneride, Bose.
|
|
|
Post Reply
|
|
|