10-15-2017, 08:08 AM | #1 |
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Commanding fuel pump on
Im looking to put some better ethanol content fuel in the car and dont wanna drive it around to empty whats in there already. I am disconnecting the fuel supply line over the intake manifold to drain the fuel into a can. Anybody know what i need to do here in HPT scanner to command the fuel pump on? Not sure what to do I know theres the in tank lo side and the high pressure pump under the intake manifold.
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
10-15-2017, 08:17 AM | #2 |
Drives: 2016 Camaro 2SS Join Date: Mar 2016
Location: Suffolk Long Island
Posts: 954
|
Dam pic is huge and sideways lol
__________________
2016 Hyper Blue 2SS A8,NPP,Moonroof
Pray ported factory intake manifold Ported TB Rotofab ARH 1 7/8 longtubes hi flow cats AFM deleted E85 11.0@124.9 11.65@118.8 pump gas,stock tune/exhaust New combo: Pray Performance Heads/cam MSD intake manifold and Circle D 3C 554/491 on E85 all work & tuning done by Pray |
11-03-2020, 02:05 PM | #3 |
Drives: Camaro Join Date: Mar 2016
Location: Michigan
Posts: 107
|
Did anybody get this to work. Just tried it on Hptuners myself and fuel pump does not turn on.
|
11-03-2020, 07:51 PM | #4 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,701
|
I was able to use the fuel pump activation through HP Tuners. Worked fine.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
11-05-2020, 01:45 PM | #5 |
Drives: '16 2SS Join Date: Feb 2017
Location: Saukville, WI
Posts: 197
|
|
11-05-2020, 02:24 PM | #6 |
Drives: 6th gen Join Date: Aug 2013
Location: US
Posts: 3,664
|
I’d like to know this as well. And are you disconnecting the fuel line above the IM and filling a jug?
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold) |
11-05-2020, 06:55 PM | #7 |
Drives: Camaro Join Date: Mar 2016
Location: Michigan
Posts: 107
|
I had my Camaro on a lift so I disconnected the line just in front of the fuel tank under the car. I had a scrap line with the correct fitting that I cut off that I stuck in the line with some rubber hose to run to a gas can.
|
11-08-2020, 07:37 AM | #8 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,701
|
Here you go.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
|
|
Post Reply
|
Thread Tools | |
|
|