03-28-2020, 09:45 PM | #1 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
Hi Ram question.
So, I’ve got the Hi Ram put on last weekend. As of now the car has factory manifolds with cat deletes, hooker x pipe, smoothed the factory airbox and dimpled it, green filter, Hi Ram, 95mm throttle body flex fuel sensor. I know, I did things a little different, but I did it that way to be different. Now my question is, what are others seeing for gains out of the Hi-Ram? The car is going on the dyno next Sunday for a tune. I’m just curious to see/hear what people are gaining. Thanks!
|
03-29-2020, 09:36 AM | #2 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
need pics of engine! I have not see a dyno of a hiram on stock cam and /or heads. Looks bad action though.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
03-29-2020, 02:43 PM | #3 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
Thanks man, I just wanted to do what most don’t just to see what the results were. After I see what it runs I’ll be putting the cam in, stock ported heads, and 2” longtubes. Here’s a picture of the bay. Its not the best picture though lol.
|
03-29-2020, 02:53 PM | #4 |
Two Lane Blacktop
Drives: '18 Camaro 2SS Join Date: Jul 2019
Location: Black River, NNY
Posts: 516
|
I was wondering what it would look like!
|
03-29-2020, 03:52 PM | #5 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
|
03-29-2020, 03:58 PM | #6 |
Two Lane Blacktop
Drives: '18 Camaro 2SS Join Date: Jul 2019
Location: Black River, NNY
Posts: 516
|
What’s the plan for the hood as is or small scoop?
|
03-29-2020, 07:30 PM | #7 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
|
03-29-2020, 08:01 PM | #8 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
Reminds me of the tunnel ram days. The Vette I saw at the last Austin get together just had his hood cut with the highram sticking out... was cool
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
03-29-2020, 08:26 PM | #9 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
03-29-2020, 09:00 PM | #10 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
Lmao. Yea, I like the look a lot the way it sits.
|
03-30-2020, 12:31 AM | #11 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
I'd cut my hood then air brush a gooblied eyed monster with long nose (intake tube) ripping out of my hood...
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
03-30-2020, 10:30 AM | #12 |
Man I'm ready to see how it does! My 2" headers are showing up today. Might jump on a high ram for nest upgrade
|
|
03-30-2020, 07:41 PM | #13 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
|
03-30-2020, 07:42 PM | #14 |
Drives: Chevy Camaro SS Join Date: Nov 2019
Location: Indiana
Posts: 225
|
|
|
|
Post Reply
|
|
|