12-27-2014, 12:01 AM | #15 |
|
found this ... http://m.instructables.com/id/Choosi...Use-With-LEDs/
Typing fat fingered on my GS3...excuse any sfelling mitcakes
__________________
2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights
'98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page |
12-27-2014, 02:23 AM | #16 |
Drives: audi Join Date: Dec 2014
Location: a1
Posts: 7
|
I would love to hook them up so they come on at the same time the ABL lights do.
|
12-27-2014, 06:13 AM | #17 |
Drives: 2012 2SS M6 CRT Join Date: Jun 2012
Location: Alachua, Fl
Posts: 251
|
Best I can find is Jumper J307 that is in the right side harness inside the rocker panel going to the door connector. It is the power path to the door accent lights (LEDs). You'll need remove the right front seat & the carpet to unwrap & separate the harness. I found a diagram that tells you where it is (2012). I'm not a modder, so I wouldn't want to take a chance on getting the wrong one.
The splice is at number 8 on the diagram. Color code PU (violet, I think).
__________________
2012 2SS M6 CRT
SOLD! - - 1983 Berlinetta, 305HO, Comp 235 cam, shorties First real car: 1968 Malibu, '67 283, Canary yellow Last edited by RedRaven; 12-27-2014 at 06:17 AM. Reason: insert pic |
|
|
|
|