02-16-2024, 06:20 AM | #1 |
OEM Intake TQ specs
Are the tq specs and tq pattern the same on the OEM manifold as the MSD?
If not, what are the specs and pattern for install? |
|
02-16-2024, 09:06 AM | #2 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,831
|
Yes but, I don't go by torque specs, I just follow the pattern to torque them from middle outward by feel. Reason being you will have to tighten them 2-3 times after installing manifold. So just snug them down in the correct pattern. And then recheck after a few heat cycles, and then rinse repeat after 500 miles or so.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
02-16-2024, 01:04 PM | #3 |
@kinglt1
Thanks Just need to get to to the dealer one last time :( |
|
|
|
Post Reply
|
|
|