05-08-2021, 06:56 PM | #1 |
1LE Wheels
I really want to put 1LE wheels on my car, specifically the Gunmetal MRR1LE replica wheels, however they only have 20x10 and 20x11. I currently have 20x9 and 20x9.5 (front and rear respectively) and I got them powder coated gloss black, and they got mounted in reverse, so 9.5 went in the front and they were hitting the strut tower I'm assuming, is there any way to get it to fit or would it be better to find wheels that look similar and run those? Any advice would be appreciated.
|
|
05-08-2021, 07:11 PM | #2 |
Drives: 2016 Camaro 2SS Join Date: Nov 2016
Location: North Jersey
Posts: 591
|
20x10 front and 20x11 rear fits if you use 1le tire sizes.
Sent from my iPhone using Tapatalk |
05-08-2021, 10:27 PM | #3 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,621
|
What sarcastic said above. Your 9.5" wheels may have the wrong offset, those 10" MRR M017 fronts will fit and work fine with various tire sizes.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 Last edited by arpad_m; 05-09-2021 at 03:04 PM. |
|
|
Post Reply
|
|
|