ZL1 Side Rockers for Gen6 Camaro - Page 6

MANNAXMAN · 06-27-2017, 10:10 AM

Quote:

Originally Posted by 501SS

I used 3m only on top portion so I wouldn't have visible drill holes. Just in case if I decide to remove them later on. I Riveted underneath. Two car washes later no issues.

Is there a gap between the ACS rocker and the stock rocker because of the 3M tape? If so, is it very visible?

AxiomVerge · 06-27-2017, 08:06 PM

Quote:

Originally Posted by MANNAXMAN

Is there a gap between the ACS rocker and the stock rocker because of the 3M tape? If so, is it very visible?

In that same vein, what thickness of 3m tape did you use? (Received my rockers yesterday but want to install this weekend)

Sent from my SM-G935T using Tapatalk

AxiomVerge · 07-02-2017, 09:27 PM

So I finally ordered and installed these. Sorry my car is a bit dirty but if I didn't take these pics immediately I never would.

I had to remove my front GM splashguards for them to fit...someone with way more skill than me could have dremeled them or something to fit but I felt at least 50% sure I would butcher them if I did that.

I used 3M tape on the top part instead of rivets. There is indeed a tape-width gap that I tried to show in my pics, but due to how the plastic is shaped it sort of pulls away on its own, and with just rivets I think the gap would be even bigger (plus now you have holes in your exterior). I put the tape about a half inch from the top because I discovered if I put it flush with the edge you could see it, and it would probably collect dust, which you could also see.

Sent from my SM-G935T using Tapatalk

Phil 2018SS · 02-05-2020, 06:10 PM

How many holes will be visible per side if removed?

07-02-2017, 09:27 PM	#73
AxiomVerge Drives: 2017 Mosaic Black M6 1SS Vert Join Date: Feb 2017 Location: Bell Canyon, CA Posts: 197	So I finally ordered and installed these. Sorry my car is a bit dirty but if I didn't take these pics immediately I never would. I had to remove my front GM splashguards for them to fit...someone with way more skill than me could have dremeled them or something to fit but I felt at least 50% sure I would butcher them if I did that. I used 3M tape on the top part instead of rivets. There is indeed a tape-width gap that I tried to show in my pics, but due to how the plastic is shaped it sort of pulls away on its own, and with just rivets I think the gap would be even bigger (plus now you have holes in your exterior). I put the tape about a half inch from the top because I discovered if I put it flush with the edge you could see it, and it would probably collect dust, which you could also see. Sent from my SM-G935T using Tapatalk __________________ 2017 Mosaic Black 1SS Convertible M6 / MRC / NPP Magnuson Heartbeat, Rotofab Previous: 2008 Corvette Convertible 2007 Pontiac Solstice GXP Last edited by AxiomVerge; 07-02-2017 at 09:52 PM.

02-05-2020, 06:10 PM	#74
Phil 2018SS Drives: 2018 Camaro SS Join Date: Dec 2019 Location: Livonia, Mi Posts: 34	How many holes will be visible per side if removed?

User Name		Remember Me?
Password