06-05-2022, 01:42 PM | #1 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
Zl1 big gulp help
Need some help from anyone with a Zl1 big gulp. The one I got is for an ss with lt4 so it hits the hood in a certain spot. Looking to see if anyone would be able to possibly get me some measurements so I can "trim" it to fit properly. Would appreciate it very much, these are just the various ones I took for reference. Shoot me a pm if you don't mind, thanks
|
06-05-2022, 06:18 PM | #2 |
Drives: CTV5 V Blackwing on order Join Date: Feb 2020
Location: East TN
Posts: 431
|
Put a wad of aluminum foil on top, close the hood, and it should give you some idea of how much to cut and where.
|
06-05-2022, 08:03 PM | #3 |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,252
|
If my car was close by I would measure it. But I don’t have access at the moment. Hopefully someone can step up and grab a couple measurements.
__________________
Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50
|
06-05-2022, 09:11 PM | #4 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
Right on Tim, was hoping I could find somebody while you were away. Would appreciate whoever could help. Have a preliminary trim line as can be seen in the picture, just want to dial it closer. Been trying to scale off a picture I have from the correct box, also can see where it hits on the hood already so I have a good idea what needs to be cut. Would rather cut just enough instead of too much
|
06-06-2022, 06:29 AM | #5 |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,550
|
Apply silly putty (any toy store) to edge of air box and close hood. This will show where you need to trim.
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
06-06-2022, 07:05 PM | #6 |
Drives: 18 ZL1 1LE Join Date: Apr 2013
Location: Florida
Posts: 703
|
Why not just get the one that is made for the ZL1 unless you got this one on the cheap. Is there any other difference besides the height?
|
06-06-2022, 07:35 PM | #7 |
Drives: 2017 Camaro ZL1 Coupe Join Date: May 2016
Location: Georgia
Posts: 5,811
|
Yes the under hood of the ZL1 is different than the under hood of the SS so that’s the reason the airbox has to be trimmed/cut to fit a ZL1.
__________________
ZL1 Coupe, PDR, Exposed carbon fiber hood insert, My Link with Nav, M6 6 speed and Silver Ice Metallic. Mods done: ceramic window tint, GM Accessories Camaro floor mats and Roto-Fab CAI.
|
06-06-2022, 07:40 PM | #8 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
Don't believe so other than the top shape. The company won't ship a box to my address so hacking up the one I have is the route I'm going. Just looking for a little help, maybe five minutes worth of time. If no one is willing I'll wait for Tim, no worries
|
06-06-2022, 08:02 PM | #9 |
Drives: 2018 Camaro ZL1 Join Date: Nov 2021
Location: St Clairsville, Ohio
Posts: 48
|
Hope these help. Shit they’re upside down.
|
06-06-2022, 08:44 PM | #10 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
thanks!
|
|
|
Post Reply
|
|
|