06-15-2021, 11:47 PM | #1 |
Drives: 2018 Chevrolet camaro Join Date: Feb 2020
Location: NEBRASKA
Posts: 5
|
Whipple Supercharger powdercoat cracking
Anybody have powder coat issues or has knowledge of powdercoat please give me some words of wisdom!
|
06-16-2021, 09:29 AM | #2 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Doesn't look like cracking to me but if it bothers you, Take the lid off and send it out to get refinished.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
06-16-2021, 12:59 PM | #3 |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 815
|
That is not cracking in the powder coating. That is in the metal of the casting.
Only way to get rid of that would be to grind/sand/polish that out and then re-powder coat. |
06-16-2021, 02:13 PM | #4 |
Drives: 2018 Chevrolet camaro Join Date: Feb 2020
Location: NEBRASKA
Posts: 5
|
It was perfectly smooth when I first put it on. Just looks cracked to me.
|
06-16-2021, 06:05 PM | #5 |
Old badass
Drives: 14GMC 2.9 16GMC Turbos 2020Silv.6.2 Join Date: Mar 2020
Location: Arlington Tx
Posts: 238
|
Is that heat stress?
|
06-16-2021, 06:08 PM | #6 | |
Drives: 2017 Camaro SS, 2011 Corvette GS Join Date: Feb 2019
Location: Erlanger, Kentucky 41018
Posts: 815
|
Quote:
|
|
06-16-2021, 10:16 PM | #7 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Was it done by Whipple or a powdercoating company?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
06-18-2021, 05:13 PM | #8 |
Drives: 2018 2SS Camaro Join Date: Mar 2020
Location: Melbourne, Australia
Posts: 91
|
Looks to me like shrinkage in the coating due to it being too thick and/or not properly cured. Ive seen that happed on auto paint before, although IF this is powdercoating then it sounds like a strange effect.
__________________
2018 2SS, Hyper Blue, Australian HSV delivered
2.9L Whipple 98RON tuned 650hp/850Nm Elite Engineering E2 Catch Can Eibach Prokit springs Mamo LT1 Ported TB |
|
|
Post Reply
|
|
|