05-24-2021, 07:53 AM | #1 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,560
|
Canard problems?
Has anyone else had problems keeping canards on the car? I've lost one from both sides!? They are not firmly attached.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
05-24-2021, 08:19 AM | #2 |
@zle_blackwing
Drives: 2018 ZL1 1LE Join Date: Mar 2017
Location: S OC
Posts: 1,390
|
No, not completely lost. There are 6 attachment points.
__________________
2018 ZL1 1LE - Red Hot, Nav, PDR
|
05-24-2021, 09:19 AM | #3 |
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,090
|
sounds to me like you are missing the wedges behind the bumper that keep them attached
__________________
|
05-24-2021, 10:11 AM | #4 |
Drives: 2018 Hot Red ZL1 Join Date: Nov 2010
Location: Los Angeles, CA
Posts: 3,599
|
I'd you turn the wheels all the way, then remove the screws holding the liners you can get access to the push pin holding it in place. It was a pian in the butt to remove so you must be missing those white clips. The canards will not fall out with those clips in place..
Sent from my moto g(7) power using Tapatalk
__________________
|
05-24-2021, 11:09 AM | #5 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,560
|
Yea, no wedges
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
05-24-2021, 12:10 PM | #6 |
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,090
|
__________________
|
05-24-2021, 02:53 PM | #7 |
Drives: 2023 SS 1LE Join Date: Mar 2020
Location: Virginia
Posts: 270
|
|
05-24-2021, 05:27 PM | #8 |
Drives: [COTW 8/3/15] 2010 Camaro SS L99 Join Date: Mar 2015
Location: Mooresville NC
Posts: 434
|
WOW! You did not have any wedges? Those wedges are in very tight, were you missing all of them?
__________________
A Little bit of power. ALL WORK DONE BY ME!
Just added 2021 ZL1 1LE to the Stable! https://www.camaro5.com/forums/showthread.php?t=418273 |
|
|
Post Reply
|
|
|