[Ryephile]

For Sale is a brand-new in the box GM # 84352119, aka the ZL1 1LE Spec Handling kit, what I refer to as the "Links and Bushings" kit.

This contains EVERY control arm and link needed to upgrade an FE2 or FE3 car to FEA spec, thorough instructions, every nut and bolt to have a completely fresh installation, and the part numbers hand-written in the Bill of Materials to show where each bolt and nut goes.

$950 shipped to the lower 48 states. PM or email at ryan at ryephile [dot com].

This will remove the slop from your 2.0T, V6, or SS suspension without adding significant NVH. It's very similar to the FE4 suspension in the SS 1LE and ZL1, but also has stiffer front ride links (the long aluminum arms) for more precise braking, steering, and overall handling precision. What's great about this kit is it's all-inclusive, and it'll work with any strut/spring/tire combo you can dream of.

ZL1 1LE-spec suspension upgrade system. AKA the FEA bushing and arm kit. by Ryephile, on Flickr

RYE_1660 by Ryephile, on Flickr

RYE_1672 by Ryephile, on Flickr

RYE_1668 by Ryephile, on Flickr

RYE_1665 by Ryephile, on Flickr

RYE_1664 by Ryephile, on Flickr

RYE_1663 by Ryephile, on Flickr

RYE_1661 by Ryephile, on Flickr



--->See official description on ThatCamaroPartsGuy's website here.<---

Thanks!
Ryan

[kropscamaro16]

hmm interesting lol why you selling?

[Ryephile]

Originally Posted by kropscamaro16

hmm interesting lol why you selling?

The FE4 comes with nearly all of these parts, save the rear knuckles and front ride links.

I also bought the kit to catalog the part numbers to build the suspension part number megathread.

The kit, as we now know, is intended for LT or SS Camaro's that are running FE2 and FE3 suspension.

[kropscamaro16]

so if i have a 16 ss non mrc car would i want or need any or all of these parts?

[ss_rob]

Originally Posted by kropscamaro16

so if i have a 16 ss non mrc car would i want or need any or all of these parts?

You'd want it all.

[kropscamaro16]

gotcha thanks! getting my new yyz springs soon so may get all these goodies also to help soon

[Ryephile]

Let's get this moving. $850 shipped to the lower 48 states.

Anyone with a 2.0T, V6, or normal SS and have track-day or otherwise precision handling aspirations, this is exactly the kit you need to build a great suspension setup.

[kropscamaro16]

hmm wonder how many labor hours this kit is too install lol im getting my new powell springs this weekend and this would work good with it

[Ryephile]

It's probably around a full day of shop labor, if I had to guess. I wonder if Chevy dealers have a book rate for this kit? You're literally changing out every control link on top of the rear knuckles. It's comprehensive. If you're already removing bits to install springs, you might as well do it all at once.

[kropscamaro16]

hmm yea true well shit if nobody jumps on it ill probably take it from u soon

[Ryephile]

Here's the instruction manual, for those that want to see it.

[Ryephile]

Sold.

[YoungFamous]

Originally Posted by Ryephile

The FE4 comes with nearly all of these parts, save the rear knuckles and front ride links.

I also bought the kit to catalog the part numbers to build the suspension part number megathread.

The kit, as we now know, is intended for LT or SS Camaro's that are running FE2 and FE3 suspension.

Can you jot down the exact suspension parts that differ between FEA and FE4 and their numbers. The 2018s differ in the front to make them lower, due to a issue I seen somewhere.