02-02-2021, 08:55 PM | #1 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,145
|
Paint Correcting heat extractor....
Has anyone paint corrected the black heat extractor on the hood. I just purchased an exposed carbon fiber one and it has some light scratches in the clear coat. My whole car was paint corrected by me as well as ceramic coated. I do remember reading in the owners manual that you couldn’t wax the heat extractor but people have done it. Was wondering if anyone out there had paint corrected their “exposed carbon fiber heat extractor”?
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
02-03-2021, 05:50 AM | #2 | |
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,281
|
Quote:
The only heat extractor I remember that waxing was not recommended was the non-exposed CF on the 2012 ZL1. I believe it had a flat paint finish with no clear coat. Starting in 2013 and on into the 6th generation, all the extractors, exposed and non-exposed, have been clear coated and therefore can be sealed, coated or waxed.
__________________
|
|
02-03-2021, 01:00 PM | #3 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,145
|
Great thanks for the info hawk!
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
02-03-2021, 01:40 PM | #4 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
My previous 2017 ZL1 owners manual definitely advised against polishing or waxing the exposed CF hood extractor. Haven’t checked the manual for my 2021 but I’d bet that recommendation is in there.
|
02-03-2021, 04:11 PM | #5 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,145
|
So now i'm back to square one....so has anyone on here actually paint corrected their exposed carbon fiber hood insert or not hahaha
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
02-03-2021, 07:41 PM | #6 |
Drives: 2018 SS 1LE Join Date: Oct 2017
Location: North Jersey
Posts: 117
|
Yes. All fine scratches were removed.
__________________
2018 ZL1 1LE
1966 Corvette 427/425 vert 1969 Corvette 350/350 |
02-03-2021, 08:15 PM | #7 |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,145
|
What product did you use on yours if you don’t mind me asking...
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| AWE Touring Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
02-03-2021, 10:28 PM | #8 |
Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019
Location: Jax/Palatka FL
Posts: 1,090
|
Did mine in two stage. Meguiars m105 and m205 with a white and orange pads, finished with ceramic coating.
__________________
|
02-04-2021, 12:24 AM | #9 |
Drives: Grandad's C2 L89 Join Date: May 2017
Location: 20*51.50N 156*29.60W
Posts: 1,711
|
Strip wash x2. White pad + cutting polish x2. Polymer sealant x2. Hybrid/polymer wax x4. Over the last 2+ years.
Looks amazing. Just go light, flat and balanced with your orbital. https://www.camaro6.com/forums/attac...1&d=1612419686
__________________
2018 ZL1 1LE sw/PDR
|
02-04-2021, 08:58 AM | #10 | |
Coupe Newbie
Drives: 2017 ZL1, 2021 Corvette Convertible Join Date: Jul 2011
Location: Columbus, Ohio
Posts: 3,281
|
Quote:
There have also been a number of threads on here where folks have paint corrected, sealed, coated or waxed the hood extractor without any issues. https://www.camaro6.com/forums/showt...heat+extractor https://www.camaro6.com/forums/showt...hood+extractor
__________________
|
|
02-04-2021, 09:10 AM | #11 |
Drives: Crush ZLE M6 | 2000 Corvette FRC Join Date: Jun 2010
Location: Cencal
Posts: 1,659
|
Addendum—Despite the black/white warning in the owners manual.....I corrected mine, and coated it. No issues.
|
02-04-2021, 10:41 PM | #12 |
2018 ZL1 1LE
Drives: 2018 ZL1 1LE Join Date: Aug 2017
Location: Westfield, IN
Posts: 1,010
|
I Had a few light/fine scratches on one side of mine, for a quick fix I use Meguiars ScratchX, great stuff, I made two passes by hand and they disappeared.
__________________
Current: 2018 ZL1 ZLE
Memories: 2017 50th Anniversary Camaro Convertible (Sold) 2003 Dodge Viper (Sold) 2005 Lingenfelter Corvette (Sold) 2004 Mazda RX-8 (Sold) |
02-05-2021, 04:00 AM | #13 |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,084
|
No issues machine polishing mine and adding ceramic coat when finished.
|
|
|
Post Reply
|
|
|