![]() |
#1 |
![]() Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
Spacers to raise ZL1 spoiler…?
I really like the ACS ZL1 spoiler on my SS. But I wish it was maybe an inch or so higher. I’m thinking about 3D printing spacers to raise it an inch. Wouldn’t be that difficult just need to get the profile.
Thoughts? May end up looking like ass but I’m curious to see how it would look. The ZL1 1LE is just too much for me (money and looks). Functional for sure but I don’t need that… I’m surprised the aftermarket hasn’t produced a slightly taller ZL1 type spoiler…
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
![]() |
![]() |
![]() |
#2 |
Shadow Gray '19 ZLE M6
|
I feel like the spoiler from the (rumored) Z28 spy shot...which was also apparently spotted a few years ago... is pretty spot on for what you want...
https://www.camaro6.com/forums/showthread.php?t=596444 Unfortunately, I don't think anyone makes it.
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
I saw that as well, that’s what got me thinking about it lol. I’d buy that spoiler in a heartbeat.
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
![]() |
![]() |
![]() |
#4 |
![]() Drives: 2022 Camaro 1SS Redline Join Date: Nov 2019
Location: MD
Posts: 297
|
That spoiler is clearly a cut down ZL1/1LE Spoiler but would be a great alternative option and actually surprised no one has made a knock off of that.
|
![]() |
![]() |
![]() |
#5 | |
![]() Drives: 2019 Camaro 2SS Join Date: Aug 2020
Location: McCordsville, Indiana
Posts: 621
|
Quote:
I may flip that picture to Anderson to give them something to think about. I would prefer that over the tall 1LE spoiler.
__________________
2019 Shock 2SS A10. 2650@10psi/LPE HPFP/XDI+30/LT4 LPFP+JMS/Soler 95mm/Rotofab, E65, CSP 2” Headers/GESI GenII Cats. MM Wild/GM SG3 suspension/1LE Brakes, Velgen VF5 Wheels/GY SC3. JRE Tuned.
|
|
![]() |
![]() |
![]() |
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,889
|
Agreed 100%. It’s a nice fit between the ZL1 and ZLE versions, fits the Gen 6 profile perfectly. My 2 cents of course.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
![]() |
![]() |
![]() |
#7 |
![]() Drives: Chevy Camaro zl1 Join Date: Dec 2021
Location: Maryland
Posts: 1
|
Exactly what I’m looking for as well. Would love to see a spacer kit sold for it
|
![]() |
![]() |
|
|
Post Reply
|
|
|