Lt2 intake results/what’s needed to fit - Page 17

laynlo15 · 03-07-2022, 08:29 AM

Quote:

Originally Posted by appleman22

Just got car my car back from its first round of mods. Flex fuel kit,Arh 1-7/8 headers long system with cats. Lt2 manifold with inlet ported to match my 95mm zr1 throttle body. Car put down 480whp on e70.

Some really good numbers on a Mustang dyno which are typically pretty stingy.

appleman22 · 03-07-2022, 05:40 PM

Quote:

Originally Posted by laynlo15

Some really good numbers on a Mustang dyno which are typically pretty stingy.

Thanks!! The car is a completely different animal now. I was super surprised at the numbers when they told me but it feels every bit as strong as the numbers suggest.

6spdhyperblue · 03-08-2022, 05:33 AM

Did you port to the oring or did you remove it?

appleman22 · 03-08-2022, 07:06 AM

Removed it and used the flat gasket that came with the billet throttle body adapter.

Blackmonba6Gen · 03-13-2022, 01:21 PM

Quote:

Originally Posted by MVPxD

Can you send a link to where you got these from? Also how many are needed? Thanks

just 4 is needed and I got it from the local auto parts store

Quote:

Originally Posted by avalonandl

Blackmonba: Where did you get the cover for the electrical cover?

ordered it from deadbranddesigns.com

CreeperRS · 03-19-2022, 08:58 PM

After watching several videos, and reading up on several threads I got everything I needed. I installed the LT2 intake on both my car and my friend’s 1LE. His is Auto, mine is Manual, we both really enjoy the performance boost and have had zero issues. The gains are definitely noticiable, I don’t have a Dyno base line, but we will get a Dyno run sometime soon. Will post the results.

VASTREETRACER · 03-14-2023, 04:31 AM

Quote:

Originally Posted by Purplt1

Got it all done. Decided to go wrinkled finish to match the valve covers

How did it turn out? I'm considering having mine painted Nightfall Gray Metallic to match the car and maybe doing either some custom body color valve covers the "CAMARO FIFTY" logo engraved and then filled with the orange to March my stripes and relocate the coils

tarmelter · 03-14-2023, 07:11 PM

Is the GPI LT2 kit plug and play? Seems it is and saves a bunch of time. I'd rather just get it and bolt it on. If I buy that and keep the stock TB and run a Rotofab will I need a tune? I figure it'd be time to do one anyways, but curious if I could run it for a month or two prior. Seems bigger TB's aren't huge HP movers unless you go FI or cam/heads. Is that true our are they worth it on a IMH modded car?

Sales@Phastek · 09-27-2023, 02:36 PM

The LT2 Manifold requires some modification to fit correctly on the LT1. You will need an LT2 Intake Manifold Installation kit which comes with the brass fitting, vacuum hose, MAP extension harness, and instructions for modifying the LT2 Manifold. Adding a LT2 Engine Cover will complete the under the hood look as well.

-Trae

driftking123 · 09-27-2023, 10:04 PM

Quote:

Originally Posted by Sales@Phastek

The LT2 Manifold requires some modification to fit correctly on the LT1. You will need an LT2 Intake Manifold Installation kit which comes with the brass fitting, vacuum hose, MAP extension harness, and instructions for modifying the LT2 Manifold. Adding a LT2 Engine Cover will complete the under the hood look as well.

-Trae

I did not get my LT2 from you guys, but I did get your installation kit. The kit worked perfectly and I followed your how-to video on YouTube. You guys did an outstanding job on the instructions. I applaud you. I have bought quite a bit from you in the past and I'm sure I'll purchase more in the future. Keep up the great work.

Sales@Phastek · 09-28-2023, 02:51 PM

Quote:

Originally Posted by driftking123

I did not get my LT2 from you guys, but I did get your installation kit. The kit worked perfectly and I followed your how-to video on YouTube. You guys did an outstanding job on the instructions. I applaud you. I have bought quite a bit from you in the past and I'm sure I'll purchase more in the future. Keep up the great work.

Glad to hear the kit and our instructions helped you out! How do you feel about the power gains, did you have any other supporting mods? Feel free to reach out to us anytime if there is anything else we can do for you.

-Trae

driftking123 · 09-28-2023, 06:33 PM

Quote:

Originally Posted by Sales@Phastek

Glad to hear the kit and our instructions helped you out! How do you feel about the power gains, did you have any other supporting mods? Feel free to reach out to us anytime if there is anything else we can do for you.

-Trae

Yes, I added a 3inch cat back exhaust from Speed Engineering, Mishimoto CAI and my TB is ported. I then added flex fuel when I added the LT2. Trifecta is doing the calibrating, but I'm still waiting on it. So far the added air DEFINITELY added power and I'm spinning wheels a lot more. I do have your "sound tube delete" kit coming tomorrow. I can't use it with the CAI due to the height of the LT2/TB.

Again, thanks for the quick shipping and the great products.

Adam

03-08-2022, 05:33 AM	#227
6spdhyperblue Drives: 6th gen Join Date: Aug 2013 Location: US Posts: 3,670	Did you port to the oring or did you remove it? __________________ ‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122 ‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold)

03-19-2022, 08:58 PM	#230
CreeperRS Drives: 20’ Chevrolet Camaro 2SS 1LE Join Date: Jan 2009 Location: San Diego Posts: 1,577	After watching several videos, and reading up on several threads I got everything I needed. I installed the LT2 intake on both my car and my friend’s 1LE. His is Auto, mine is Manual, we both really enjoy the performance boost and have had zero issues. The gains are definitely noticiable, I don’t have a Dyno base line, but we will get a Dyno run sometime soon. Will post the results. __________________

03-14-2023, 07:11 PM	#232
tarmelter Drives: 2022 1SS 1LE Join Date: Nov 2021 Location: Maine Posts: 105	Is the GPI LT2 kit plug and play? Seems it is and saves a bunch of time. I'd rather just get it and bolt it on. If I buy that and keep the stock TB and run a Rotofab will I need a tune? I figure it'd be time to do one anyways, but curious if I could run it for a month or two prior. Seems bigger TB's aren't huge HP movers unless you go FI or cam/heads. Is that true our are they worth it on a IMH modded car? __________________ 2022 Shadow Gray Metallic 1SS 1LE A10 Rotofab Dry ST delete.

09-27-2023, 02:36 PM	#233
Sales@Phastek Drives: 2016 1SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,817	The LT2 Manifold requires some modification to fit correctly on the LT1. You will need an LT2 Intake Manifold Installation kit which comes with the brass fitting, vacuum hose, MAP extension harness, and instructions for modifying the LT2 Manifold. Adding a LT2 Engine Cover will complete the under the hood look as well. -Trae __________________

03-08-2022, 07:06 AM	#228
appleman22 Drives: 2017 1ss 1le Join Date: Sep 2015 Location: new york Posts: 436	Removed it and used the flat gasket that came with the billet throttle body adapter.

User Name		Remember Me?
Password