10-24-2020, 08:48 AM | #1 |
Drives: 2018 ZL1 Join Date: Sep 2016
Location: West Palm Beach
Posts: 194
|
Loose lug nuts!!!
I just switched to 15in D5 beadlocks on my Z and keep getting loose lug nuts after driving only a few miles. Anyone else experience this? I've tried different torque specs.
Last edited by 11bravoss; 10-24-2020 at 01:52 PM. |
10-24-2020, 02:46 PM | #2 |
Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
What torque specs? 140ft lbs is what the manual calls for.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
10-24-2020, 10:50 PM | #3 |
Drives: 2017 1SS 1LE Join Date: Jun 2016
Location: Detroit, MI
Posts: 1,001
|
And if you're already using 140 ft-lbs for torque, next thing I'd check is that you have the proper lug nut dimensions for the wheels, specifically the dimensions of the taper.
__________________
2017 SS 1LE.
|
10-27-2020, 09:58 AM | #4 | |
Drives: 2017 2SS, 50th pkg, M6, MRC, NPP Join Date: Jan 2016
Location: Ocean City, NJ
Posts: 3,178
|
What is the thickness of that wheel in the lug area compared to stock? I think your lug nuts may be bottoming out.
Edit: Quote:
https://www.forgestar.com/wheels/d5-drag-racing-wheel/ This thread has some size recommendations for VMS drag wheels, which also require a conical tapered nut: https://www.camaro6.com/forums/showthread.php?t=579308 Last edited by ctrlz; 10-28-2020 at 10:57 AM. |
|
|
|
Post Reply
|
|
|