Nervous jacking the car up - Page 3

keep_hope_alive · 09-20-2022, 08:57 PM

I did just order the ZL1 Addons Lift Pads after looking at the jack point locations. My Honda and Toyota had pinch weld reinforcements that created a stronger, reinforced spot. These pads look awesome.

2SS Capt · 09-20-2022, 10:53 PM

Quote:

Originally Posted by Gen6cyl

I have heard good things about quick jacks . I grew up in Atlanta, been in country almost 30 years.

Quote:

Originally Posted by 22SS1LE

id like to eventually get a quick jack. but who knows when that will be

LOVE my QuickJacks...

Gen6cyl · 10-06-2022, 06:09 AM

Very sano , like a operating room.

truckrglenn · 02-07-2023, 07:46 PM

Which model Quickjack? The 5000TL looks good or should I order the 7000TL?

2SS Capt · 02-08-2023, 11:24 AM

Quote:

Originally Posted by truckrglenn

Which model Quickjack? The 5000TL looks good or should I order the 7000TL?

The 5000 has plenty of capacity for the Camaro...

keep_hope_alive · 02-08-2023, 03:04 PM

The 5000TL is a future desire. For now, i'm happy that I can lift the entire side at once. The lift points are handy. I do have a jack pad and some extra rubber pads that allow for clearance with the floor jack and body. It's kind of silly.

haggler · 02-09-2023, 03:10 PM

Did my skip shift eliminator and oil change. I used those aluminum pinch weld adapters stacked on top of a hockey puck to lift. My harbor freight jack's saddle barely clears the rocker panel if the puck sits as close to the edge of the saddle as possible. I wanted to get the zl1 addon lift points but I dont want them permanently attached to the pinch weld, and amazon doesnt sell them individually. I don't like lifting really high on one side but had to for the skip shift eliminator. Expanding a 90 degree pliers helped unplug the connection, otherwise I wouldn't have been able to do it given the angle and tight space.

PhotoGuy · 04-25-2023, 03:18 AM

Quote:

Originally Posted by Gen6cyl

Is the cross member behind the diff. a safe jacking point?Anybody

yes you can jack your camaro from that rear support .... done it many times with no issue ....

302crossram · 04-25-2023, 07:08 AM

I have used the rear crossmember lift point with a hockey puck

works great.

when raising on the pinch welds, I have the missus lift the other side while I'm
lifting my side, 2 floor jacks (zl1 lift blocks installed)

eldersCAMARO · 04-25-2023, 02:57 PM

this may be a stupid question but to use a lift instead of jacks, can you lift the entire car with the zl1 add-ons with hockey pucks from the lift points on the furthest points in the front and furthest points in the back?

Just want to make sure I installed it at the perfect points.

09-20-2022, 08:57 PM	#29
keep_hope_alive Electrical Engineer Drives: 2023 1SS A10 Black Join Date: Apr 2022 Location: Illinois Posts: 775	I did just order the ZL1 Addons Lift Pads after looking at the jack point locations. My Honda and Toyota had pinch weld reinforcements that created a stronger, reinforced spot. These pads look awesome. __________________ 2023 1SS A10 Black NPP/C2U/H72 - Daily Driver Historically an Accord and Camry owner with self-performed maintenance/repair. 1100: 5/3/22 . . . . . . . 2000: 6/25/22 . . . . . .4000: 8/17/22 . . . . . . . 6000: 9/10/22 Daily Driver mileage update: 22k mi. @ April 2024 New Engine @ 22,600 Build Log: https://www.camaro6.com/forums/showt...6#post11353116

02-07-2023, 07:46 PM	#32
truckrglenn Drives: Chevy camaro Join Date: Jan 2022 Location: Tennessee Posts: 185	Which model Quickjack? The 5000TL looks good or should I order the 7000TL? __________________ Glenn 2017 Camaro 2LT RS Convertible Last edited by truckrglenn; 02-07-2023 at 08:16 PM.

02-08-2023, 03:04 PM	#34
keep_hope_alive Electrical Engineer Drives: 2023 1SS A10 Black Join Date: Apr 2022 Location: Illinois Posts: 775	The 5000TL is a future desire. For now, i'm happy that I can lift the entire side at once. The lift points are handy. I do have a jack pad and some extra rubber pads that allow for clearance with the floor jack and body. It's kind of silly. __________________ 2023 1SS A10 Black NPP/C2U/H72 - Daily Driver Historically an Accord and Camry owner with self-performed maintenance/repair. 1100: 5/3/22 . . . . . . . 2000: 6/25/22 . . . . . .4000: 8/17/22 . . . . . . . 6000: 9/10/22 Daily Driver mileage update: 22k mi. @ April 2024 New Engine @ 22,600 Build Log: https://www.camaro6.com/forums/showt...6#post11353116

02-09-2023, 03:10 PM	#35
haggler Drives: '23 2SS RSblue 6MT, sold '19 ND2 Join Date: Dec 2021 Location: Los Angeles Posts: 262	Did my skip shift eliminator and oil change. I used those aluminum pinch weld adapters stacked on top of a hockey puck to lift. My harbor freight jack's saddle barely clears the rocker panel if the puck sits as close to the edge of the saddle as possible. I wanted to get the zl1 addon lift points but I dont want them permanently attached to the pinch weld, and amazon doesnt sell them individually. I don't like lifting really high on one side but had to for the skip shift eliminator. Expanding a 90 degree pliers helped unplug the connection, otherwise I wouldn't have been able to do it given the angle and tight space. __________________ '23 2SS, 6 speed, NPP, Copper-free brakes, 56V Carbon Flash Rims, Riverside Blue 1LE sway bars EOS front splitter 5-6-22:1100, 7-19-22: 3000, 8-3-22: TPW 8/15/22, 10-4-22: ETA 10/13/2022 10-15-22 6000

10-06-2022, 06:09 AM	#31
Gen6cyl Drives: Chevy Camaro 2021 ,rs, v6, manual Join Date: Feb 2022 Location: Georgia Posts: 868	Very sano , like a operating room.

04-25-2023, 07:08 AM	#37
302crossram Drives: 2023 Sharkskin 2SS Join Date: Oct 2022 Location: NWFL Posts: 758	I have used the rear crossmember lift point with a hockey puck works great. when raising on the pinch welds, I have the missus lift the other side while I'm lifting my side, 2 floor jacks (zl1 lift blocks installed)

04-25-2023, 02:57 PM	#38
eldersCAMARO CamaroLove Drives: 2023 ZL1 Shark Skin Join Date: Aug 2015 Location: Ask Me. Maybe ill say Posts: 79	this may be a stupid question but to use a lift instead of jacks, can you lift the entire car with the zl1 add-ons with hockey pucks from the lift points on the furthest points in the front and furthest points in the back? Just want to make sure I installed it at the perfect points.

User Name		Remember Me?
Password