Wheels and tires

Kobe15 · 08-10-2022, 11:16 PM

Hello everyone! I'm new to the forums.

I'm looking to get new tires and wheels. I think I am going with the Stance SF10 wheels (also looking at MRR228), 20x10 front and 20x11 rear. I wanted to go as wide as possible, maybe 285/30/20 front and 305/30/20 rear. Can I go 315 rear with no issues? With smaller diameter wheels do you think it will be needed to be lowered for a better look? I don't like the wheel well showing and want the nicest stance possible.

Any recommendations on tires? I would like to stay with Firestone Indy 500s, but they don't make the tires in the rear size I would need. It's a 305/35/20 and I think it will be too tall and I'd need a spacer and I'd rather not add a spacer.

Thank you!

Kobe15 · 08-11-2022, 12:00 AM

A few pictures

The Maverick · 08-11-2022, 10:10 AM

I'll leave the tire/wheel response to SS owners, but I was curious about that cool raised design on the hood! What is that material and who makes these?

kropscamaro16 · 08-11-2022, 10:34 AM

20x10 20x11 2853020 3053020 would work fine its oem zl1 / 1le fitment it will fit no problems

FlukeSS · 08-11-2022, 10:40 AM

Quote:

Originally Posted by kropscamaro16

20x10 20x11 2853020 3053020 would work fine its oem zl1 / 1le fitment it will fit no problems

Offset: ET20 front ET43 rear

Also some people have made claims you can do 315/30R20 rear tires on these cars without rubbing. But 35 aspect is where rubbing can occur. Which requires relocation of the wire harness

kropscamaro16 · 08-11-2022, 10:42 AM

yea i dont give people that lol let them figure it out thereselves

FlukeSS · 08-11-2022, 10:55 AM

Quote:

Originally Posted by kropscamaro16

yea i dont give people that lol let them figure it out thereselves

So if I destroy my brakes, or blow out my wire harness who should I send the bill to?

kropscamaro16 · 08-11-2022, 10:59 AM

Quote:

Originally Posted by FlukeSS

So if I destroy my brakes, or blow out my wire harness who should I send the bill to?

not my problem...

Kobe15 · 08-11-2022, 03:38 PM

Quote:

Originally Posted by The Maverick

I'll leave the tire/wheel response to SS owners, but I was curious about that cool raised design on the hood! What is that material and who makes these?

It's embossed with a separate vinyl underneath the black chrome vinyl. You can find logos in PNG format online and a wrap company can then take that logo and make the vinyl and emboss it on your vehicle. Wrap Vault of Scottsdale did my car.

Kobe15 · 08-11-2022, 03:40 PM

Quote:

Originally Posted by kropscamaro16

20x10 20x11 2853020 3053020 would work fine its oem zl1 / 1le fitment it will fit no problems

Thanks for the response. Your car looks sweet!

Junction65 · 08-11-2022, 03:49 PM

This guy does not approve

Kobe15 · 08-11-2022, 03:50 PM

Quote:

Originally Posted by FlukeSS

Offset: ET20 front ET43 rear

Also some people have made claims you can do 315/30R20 rear tires on these cars without rubbing. But 35 aspect is where rubbing can occur. Which requires relocation of the wire harness

I think I may do 315/30 if I can find an aggressive looking performance tire I like. I wish the Indy 500 came in that size.

How do you like your K&N CAI? Any noticeable difference in sound or power? I was thinking of adding that as well.

Kobe15 · 08-11-2022, 03:54 PM

Quote:

Originally Posted by Junction65

This guy does not approve

LOL That guy actually came over to get a closer look and told me how much he loved the car.

arpad_m · 08-11-2022, 04:03 PM

You can go 285/30/20 and 305/30/20 with no issues whatsoever if your wheel offsets are correct (+20 and +43 front and rear, respectively), even 315/30/20 in the rear will be fine (might need to relocate the main body wiring harness a wee bit).

Very nice car, congratulations

and of course

to the forums.

08-10-2022, 11:16 PM	#1
Kobe15 Drives: 20021 Chevrolet Camaro 2SS Join Date: Aug 2022 Location: AZ Posts: 34 View My Garage	Wheels and tires Hello everyone! I'm new to the forums. I'm looking to get new tires and wheels. I think I am going with the Stance SF10 wheels (also looking at MRR228), 20x10 front and 20x11 rear. I wanted to go as wide as possible, maybe 285/30/20 front and 305/30/20 rear. Can I go 315 rear with no issues? With smaller diameter wheels do you think it will be needed to be lowered for a better look? I don't like the wheel well showing and want the nicest stance possible. Any recommendations on tires? I would like to stay with Firestone Indy 500s, but they don't make the tires in the rear size I would need. It's a 305/35/20 and I think it will be too tall and I'd need a spacer and I'd rather not add a spacer. Thank you! Last edited by Kobe15; 08-10-2022 at 11:48 PM.

08-11-2022, 12:00 AM	#2
Kobe15 Drives: 20021 Chevrolet Camaro 2SS Join Date: Aug 2022 Location: AZ Posts: 34 View My Garage	A few pictures Attached Images

08-11-2022, 10:34 AM	#4
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,813	20x10 20x11 2853020 3053020 would work fine its oem zl1 / 1le fitment it will fit no problems __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

08-11-2022, 10:42 AM	#6
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,813	yea i dont give people that lol let them figure it out thereselves __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

08-11-2022, 03:49 PM	#11
Junction65 Drives: 2011 GMC Sierra 1500 Join Date: Jun 2022 Location: Alabama Posts: 415	This guy does not approve Attached Images __________________ 2023 LT1 Coupe M6 - Black (GBA) on Black (H1T) Blade spoiler (5ZU), Recaro seats (AQJ), Technology pack (Y3W) LT1 PBC engine built by Shane Parker Current mileage: 310

08-11-2022, 10:10 AM	#3
The Maverick Somewhere in the Kalahari Drives: 2021/18 (de-fresh) 3LT RS Join Date: Dec 2017 Location: California Posts: 646	I'll leave the tire/wheel response to SS owners, but I was curious about that cool raised design on the hood! What is that material and who makes these?

08-11-2022, 04:03 PM	#14
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,594 View My Garage	You can go 285/30/20 and 305/30/20 with no issues whatsoever if your wheel offsets are correct (+20 and +43 front and rear, respectively), even 315/30/20 in the rear will be fine (might need to relocate the main body wiring harness a wee bit). Very nice car, congratulations and of course to the forums. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

User Name		Remember Me?
Password