06-14-2022, 07:19 PM | #29 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
|
06-14-2022, 07:38 PM | #30 |
Drives: 997 GTS, ZL1 A10, ZLEM6, ZLEA10 Join Date: Dec 2017
Location: NYC/NJ
Posts: 629
|
SS le is a formidable car - just look at the best lap time section in this site. With a slight amount of mods it’s going to be as fast or even faster than the ZLE on most tracks - especially shorter ones like lightning.
Regarding your tire wear - u are getting near zero wear on the inside - very opposite to my pattern. Yeah more camber would certainly help you. If the wear pattern continues I suggest you flip the tires on the wheel between track days..that will double the life for you |
06-14-2022, 07:51 PM | #31 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
|
06-14-2022, 08:06 PM | #32 |
Drives: Garnet Red / ZL1 1LE Join Date: Apr 2016
Location: Bel Air, MD
Posts: 482
|
The outside of the tire shouldn't be wearing like that. Definitely dial in your camber + toe.
Did you turn the front struts to Track Camber? If so, I would set F -2.75 / R - 2.00 Do you have 0.05 Toe In F/R? Some folks also have good wear with 0 Toe F/R.
__________________
#SAVETHEMANUALS
|
06-14-2022, 08:10 PM | #33 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
|
06-14-2022, 08:12 PM | #34 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
NJMP Lightning and Pocono Mega Track Layouts have banked turns.
|
06-14-2022, 08:22 PM | #35 |
Drives: 997 GTS, ZL1 A10, ZLEM6, ZLEA10 Join Date: Dec 2017
Location: NYC/NJ
Posts: 629
|
I think it’s your toe - I would zero that out in the front…
|
06-14-2022, 08:26 PM | #36 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
|
06-14-2022, 08:36 PM | #37 |
Drives: 997 GTS, ZL1 A10, ZLEM6, ZLEA10 Join Date: Dec 2017
Location: NYC/NJ
Posts: 629
|
|
06-14-2022, 08:48 PM | #38 |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
|
06-14-2022, 08:56 PM | #39 |
Shadow Gray '19 ZLE M6
|
Damn consumables! I'll be at Lightning w/ NNJR on 10/8-9. Also will be at Watkins Glen w/ NNJR 8/26-28. That should be a great event if anyone can make it
__________________
2019 ZL1 1LE | M6 | SGM | PDR | CF Dash | Nav | Wheel Locks
PPF | Paint Correction | ZL1 Addons Rock Guards | ZL1 Addons Lift Pads | ZL1 Addons Feather Lite Tow Hook | JWM Smoked Sidemarkers | Wildhammer Smoked Rear Reflectors | JWM License Plate LEDs | RotoFab CAI | ADM IC Reservoir v2 | BC Forged RZ05 | SPL Toe Arms | BW Brake Deflectors | CMS Roll Bar | Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) | '00 WS6 (bolt-ons, heads, cam, 12 bolt) | '05 CTS-V (bolt-ons, short throw) | '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) | '01 WS6 YouTube |
06-14-2022, 09:19 PM | #40 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,211
|
Wow I'm just realized how many guys are in the NJ area. We definitely need to meet up sometime on or off the track.
|
06-14-2022, 10:02 PM | #41 |
Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,211
|
Dont want to hijack the thread but I figured snice we are on the subject of SC3R I figured I ask. I bought a set of wheels with SC3R and my last track day I felt like they where not grippy as my other set. Could it be they had to many heat cycles? Even though they still have a decent amount ot thread. I also noticed they have alot of blueish tint around them.
|
06-15-2022, 06:08 AM | #42 | |
Drives: Chevrolet Camaro ZL1 1LE Join Date: Oct 2021
Location: NY
Posts: 693
|
Quote:
|
|
|
|
Post Reply
|
Thread Tools | |
|
|