Lower front daylight running light out

zx9rmal · 02-12-2022, 04:55 AM

Anyone familiar with replacing the bulb? It’s the narrow vertical light.

arpad_m · 02-12-2022, 07:54 AM

I'm afraid you'll need part 84341735 or 84341736, see this page: https://www.gmpartsdirect.com/v-2020...amp-components

While it could also be the control module, I think in that case both DRLs would go out; alternatively, a wiring issue is also possible. Read the current codes with an OBD-II reader before you purchase anything expensive, it may give you clues about what went wrong.

Flexhorn · 02-12-2022, 01:10 PM

I had the stealership replace mine. $400

zx9rmal · 02-15-2022, 01:39 PM

Quote:

Originally Posted by Flexhorn

I had the stealership replace mine. $400

They told me light alone is like $380, plus a couple hours labor. What's involved to install? Does the bumper or other stuff have to come off?

NashZL1 · 02-17-2022, 08:14 AM

The one on the passenger side of my new (350 miles) ZL1 quit.

Dropping it off Wed. 2/23 at dealer for that and 500 miles oil change, and... a CEL for evaporative emissions issue. UGH!

Flexhorn · 02-19-2022, 11:09 AM

I think the bumper does need to come off. I couldn’t figure it out to do myself

02-12-2022, 04:55 AM	#1
zx9rmal Drives: '20 ZL1 M6 Join Date: Apr 2017 Location: FT. Lauderdale, FL Posts: 717	Lower front daylight running light out Anyone familiar with replacing the bulb? It’s the narrow vertical light. __________________ Mal Ft. Lauderdale, FL '20 Camaro ZL1 M6 '22 Kawasaki ZX-14R

02-12-2022, 07:54 AM	#2
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,575 View My Garage	I'm afraid you'll need part 84341735 or 84341736, see this page: https://www.gmpartsdirect.com/v-2020...amp-components While it could also be the control module, I think in that case both DRLs would go out; alternatively, a wiring issue is also possible. Read the current codes with an OBD-II reader before you purchase anything expensive, it may give you clues about what went wrong. Attached Images __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

02-17-2022, 08:14 AM	#5
NashZL1 Drives: 2022 Camaro ZL1 Join Date: Dec 2021 Location: Nashville, TN Posts: 216	The one on the passenger side of my new (350 miles) ZL1 quit. Dropping it off Wed. 2/23 at dealer for that and 500 miles oil change, and... a CEL for evaporative emissions issue. UGH! __________________ Randy in Nashville 2022 Chevrolet Camaro ZL1 A10 2020 Ford Mustang Shelby GT500 2020 Genesis G90 Ultimate 2019 Mercedes-Benz SL450 2017 Corvette Grand Sport A8 2016 Hyundai Equus Ultimate 1971 Datsun 240Z

02-12-2022, 01:10 PM	#3
Flexhorn Drives: A10 ZL1 Join Date: Mar 2018 Location: Longview, Texas Posts: 142	I had the stealership replace mine. $400

02-19-2022, 11:09 AM	#6
Flexhorn Drives: A10 ZL1 Join Date: Mar 2018 Location: Longview, Texas Posts: 142	I think the bumper does need to come off. I couldn’t figure it out to do myself

User Name		Remember Me?
Password