06-15-2016, 10:28 PM | #1 |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
Rear view mirror help
Does anyone have a clue on how to remove the rearview mirror?
I am getting a new one from my dealer for warranty but they have no clue how to remove it. I just want to avoid having to leave my car at the dealer for possibly a couple days over something so minor. Any help would be appreciated. Thanks |
06-15-2016, 10:31 PM | #2 |
what... just grab and twist the base. It's exactly like a c7 corvette if you can find the procedure for that with google-fu
__________________
|
|
06-15-2016, 10:33 PM | #3 |
https://gsi.ext.gm.com/image_en_us/g...77/4177521.gif
Inside Rearview Mirror Cover Procedure Using appropriate tool, release the bottom cover from the mirror. Inside Rearview Mirror Procedure 1. Adjust the mirror to the full upward position. 2. Place a flat-bladed tool through both lower holes on the mirror. 3. Using the flat-bladed tool, rotate the mirror 90 degrees to remove the mirror. 4. Disconnect the electrical connector. 5. Using the flat-bladed tool, install the mirror by rotating the mirror until an audible click is heard. An audible click is heard when the mirror is fully seated. Note: •DO NOT grab the mirror to remove or to install, you will damage the mirror. •Ensure screwdriver is through both lower holes of the mirror or you will damage the mirror. •More force is required to remove the mirror than to install the mirror.
__________________
|
|
06-15-2016, 10:43 PM | #4 |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
Thank you. Thats just what I needed.
|
06-15-2016, 10:49 PM | #5 |
Yeah dude, I help when I can.
__________________
|
|
04-24-2017, 01:15 PM | #6 |
Drives: 2020 Camaro ZL1 Convertible Join Date: May 2014
Location: Dallas, Texas
Posts: 32
|
Thanks again for this thread! I was at a loss as to how to remove the mirror in my new 2017 vert.
__________________
-d00mz
2020 ZL1 Convertible in Shock -Bone stock (for now) 2017 ZL1 Convertible in Hyper Metallic Blue (sold) -stock 2014 ZL1 Convertible in Red Hot (sold) -Roto Fab Cold Air Intake with larger HX Rez -2.5inch upper pulley, solid isolator -Ported Blower Snout -ARH 2 inch headers and longflow off-road pipes -1000cc fuel injectors -NGK TR71X plugs -Catch Can -Dyno tuned to 600RWHP -All work done by Advanced Modern Performance |
04-24-2017, 09:59 PM | #7 |
Custom Black FiFTY
|
That's hilarious that the dealer doesn't know how to remove it
__________________
Wanted a F1FTY edition but decided to make my own
|
04-25-2017, 08:31 AM | #8 |
Drives: Overkill Supercharged 2016 CamaroV6 Join Date: Mar 2016
Location: Florida
Posts: 982
|
Not suprised on the dealer not knowing how to do it When they put my new headliner in they had no clue how to get it out of the car or put the new one in without bending creasing it.. they had to call GM technicians at corporate.. turns out the windshield has to be removed.
|
|
|
Post Reply
|
|
|