05-31-2023, 02:57 PM | #1 |
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Negative Torque tables at Idle??
dyno1.pdf
dyno2.pdf Hey Guys, thought I'd post my numbers after the blower/cam install. The previous number of 808hp came from a Mustang. On another note, I have noticed that the car has been idling high - 700 commanded, ~860 indicated. I brought this up to the dyno guy and he said he noticed it. He also said the torque tables at idle were showing a negative value, and that might have something to do with the high idle. Or, maybe a small vacuum leak. No CEL showing. I would be grateful for any thoughts before I sign an open check to fix the problem.
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 Last edited by MartinLe; 06-01-2023 at 11:56 AM. Reason: change header |
05-31-2023, 06:13 PM | #2 |
Drives: ‘23 ZL1-1LE Join Date: Mar 2023
Location: SoCal
Posts: 361
|
Nice numbers!
|
06-01-2023, 07:36 AM | #3 | |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,578
|
Quote:
__________________
'20 ZL1 1LE A10,
LME 390, E2650, FBO, 100 oct.; |
|
06-01-2023, 09:17 AM | #4 | |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Quote:
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
06-01-2023, 11:54 AM | #5 | |
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Quote:
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
|
|
|
Post Reply
|
|
|