Quick jack bl 7000 slx - Page 5

RamAir02 · 07-31-2022, 07:28 PM

I will say the quickjack was one of the best purchases I ever made. It is important to check for any leaks / loose fittings and ensure the PSI is correct in the air cylinders. There is a maintenance / check before each use schedule in the manual. Always lift on level ground and with the two pieces as parallel as possible.

NotFast · 08-07-2022, 02:09 PM

Quote:

Originally Posted by KirkH

Problem solved.

Thanks for the update!

wakespeak · 10-09-2022, 06:48 PM

Quote:

Originally Posted by RamAir02

I will say the quickjack was one of the best purchases I ever made. It is important to check for any leaks / loose fittings and ensure the PSI is correct in the air cylinders. There is a maintenance / check before each use schedule in the manual. Always lift on level ground and with the two pieces as parallel as possible.

Setting up mine today. How are you supporting your ZL1 1LE? Is that with the standard blocks and the ZL1 add-ons or with the QJ pinch weld blocks?

2SS Capt · 10-09-2022, 11:17 PM

It is VERY important you have everything centered and use only one block per lift point (if you use 2, they may slip)... If everything is centered and such it will be very stable, if you are sloppy setting it up it could end badly... Don't get complacent...

RamAir02 · 10-10-2022, 08:19 AM

Quote:

Originally Posted by wakespeak

Setting up mine today. How are you supporting your ZL1 1LE? Is that with the standard blocks and the ZL1 add-ons or with the QJ pinch weld blocks?

ZL1addons lift pads + QJ standard blocks

adamjwilson · 08-01-2023, 07:08 AM

Here is a strange question for quick jack owners: Have you ever jacked up the car in the garage (in case of a possible flood from a hurricane?) Moving to FL and have never had to experience this, so just looking for alternatives to save the car if it does flood and not too deep.
But now I am thinking a 4 post lift may be better suited all around? Advantage Lifts?

ST1LE · 08-01-2023, 05:21 PM

Quote:

Originally Posted by adamjwilson

Here is a strange question for quick jack owners: Have you ever jacked up the car in the garage (in case of a possible flood from a hurricane?) Moving to FL and have never had to experience this, so just looking for alternatives to save the car if it does flood and not too deep.
But now I am thinking a 4 post lift may be better suited all around? Advantage Lifts?

I would suggest lifting it on to jacks, and keeping the Quickjack Dry and functional.

4 post wins every day.

Kerry · 08-01-2023, 07:06 PM

BE CAREFUL WITH SOME OF THE ADD ON BLOCKS. ONLY USE THE ONES WITH THE SET SCREWS. BE SURE THEY ARE TIGHT. IT CAN ROLL OFF THOSE

CalgaryZL1 · 08-01-2023, 07:14 PM

Quote:

Originally Posted by Kerry

BE CAREFUL WITH SOME OF THE ADD ON BLOCKS. ONLY USE THE ONES WITH THE SET SCREWS. BE SURE THEY ARE TIGHT. IT CAN ROLL OFF THOSE

Yes, I was very paranoid of that happening so I built some attachments to fit the quick jack blocks that slot into the pinch weld did this before I bought some of the clamp on lift pads

07-31-2022, 07:28 PM	#57
RamAir02 Shadow Gray '19 ZLE M6 Drives: '19 ZL1 1LE M6 Join Date: Apr 2009 Location: NJ Posts: 1,442 View My Garage	I will say the quickjack was one of the best purchases I ever made. It is important to check for any leaks / loose fittings and ensure the PSI is correct in the air cylinders. There is a maintenance / check before each use schedule in the manual. Always lift on level ground and with the two pieces as parallel as possible. Attached Images __________________ 2019 ZL1 1LE \| M6 \| SGM \| PDR \| CF Dash \| Nav \| Wheel Locks PPF \| Paint Correction \| ZL1 Addons Rock Guards \| ZL1 Addons Lift Pads \| ZL1 Addons Feather Lite Tow Hook \| JWM Smoked Sidemarkers \| Wildhammer Smoked Rear Reflectors \| JWM License Plate LEDs \| RotoFab CAI \| ADM IC Reservoir v2 \| BC Forged RZ05 \| SPL Toe Arms \| BW Brake Deflectors \| CMS Roll Bar \| Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) \| '00 WS6 (bolt-ons, heads, cam, 12 bolt) \| '05 CTS-V (bolt-ons, short throw) \| '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) \| '01 WS6 YouTube

10-09-2022, 11:17 PM	#60
2SS Capt 2020 Shadow Gray 2SS Drives: 2020 2SS - A10, NPP, MRC, CAI Join Date: Dec 2019 Location: SoCal Posts: 3,030	It is VERY important you have everything centered and use only one block per lift point (if you use 2, they may slip)... If everything is centered and such it will be very stable, if you are sloppy setting it up it could end badly... Don't get complacent... __________________ 2020 SGM 2SS - A10, NPP, MRC, Red Calipers, Black Camaro Fender Badge, Footwell Lighting *Added after delivery:* - GMP CAI, GMP Black Strut Tower Brace, MRR017 1LE Wheels, SS Armrest, Black Fuel Door, Stainless Sport Pedals, SS Wheel Caps, Black Lugs/Locks, GM Splash Guards, DD Smoked LED Markers, Smoked Rear Reflectors, Mishimoto Catch Can, Xpel PPF - Full Front, SunTek 35% Tint, CeramicPro coating, RST Stainless Brake Lines, Castrol SRF, MSD Super Conductor Wires *Left: My "fun" ride. Right: My "work" ride: a Gulfstream G600. One's top speed is 180 Mph, the other, 620 Mph...*

08-01-2023, 07:08 AM	#62
adamjwilson Drives: 2022 Camaro 2SS A10 Join Date: Jul 2022 Location: FL Posts: 524	Here is a strange question for quick jack owners: Have you ever jacked up the car in the garage (in case of a possible flood from a hurricane?) Moving to FL and have never had to experience this, so just looking for alternatives to save the car if it does flood and not too deep. But now I am thinking a 4 post lift may be better suited all around? Advantage Lifts? __________________ 2022 Camaro 2SS/ Whipple 3.0 / 2"Headers/ PRC LTX Heads/ Forged Internals/LT4 fueling/ DSX Aux/ DSX Flex Fuel/ Meth Injection/ Katech 112 TB/ RotoFab Big Gulp/ Corsa NPP/ Various exterior mods Last edited by adamjwilson; 08-01-2023 at 07:57 AM.

08-01-2023, 07:06 PM	#64
Kerry Drives: 2019 2SS Camaro Join Date: Apr 2012 Location: Al Posts: 828	BE CAREFUL WITH SOME OF THE ADD ON BLOCKS. ONLY USE THE ONES WITH THE SET SCREWS. BE SURE THEY ARE TIGHT. IT CAN ROLL OFF THOSE

User Name		Remember Me?
Password