C7Carbon | ZL1 ILE style rear wing | IN DEVELOPMENT, 3D TECH! - Page 39

Biscuit.fr · 01-09-2019, 08:12 PM

even with the short pylons it has an angle...
I like it more every day

Tried it last sunday with a shot at 150!
No vibrations, you can almost feel the down force, car was sticking to the road!
But got it just for the great looking, not for the race.
I recommend.

some more pictures after a bath and outside....

Biscuit.fr · 01-10-2019, 05:31 AM

do you know where I can find the "X" decals on the side of the wing we can see on the OEM?
I've seen it once, can't remember where it was...
tried ebay, amazon..
Thanks if you have a link

C7 Carbon · 01-10-2019, 08:18 PM

Awesome pics, thank you so much for sharing. Your ZL1 looks amazing!

Grumpy1 · 01-11-2019, 06:25 PM

Biscuit, first off the car looks great!!!!!!!
I can see the angle on the wings that I thought was missing on the previous pics.
Only thing is my mind was made up on the stock pylons but now you have me thinking about getting the smaller ones.
IMO the wing at that height seems to sit or flow better with the lines of the car.
Decision, Decisions.......Sometimes I think I just put too much thought into things......Lol

Biscuit.fr · 01-11-2019, 09:36 PM

Thank you all

I like the short ones...
But your choice ;-)

Wang · 01-14-2019, 11:07 AM

Got mine from my wife for Christmas. Installed and looks amazing!

A few things.
I got a high pylons one, lookin great but I am kind of a picky guy, so will you sell short pylons as extra parts?

Will you guys release any OEM replica pylons after? Just askin. Wings looks fantastic.

C7 Carbon · 01-15-2019, 04:35 PM

Sure, we can offer you an additional set of uprights. Just PM us your order # and the upright height you are interested in so we can make sure to sell you the correct set.

PittsburghCamaro · 01-18-2019, 04:12 AM

Looking for a SS 1LE wing! Nothing out that matches the mounting holes of the SS 1LE

C7 Carbon · 01-19-2019, 07:59 PM

The SS 1LE bolting pattern is different from the SS pedestal spoiler, as the 1LE spoiler is a bit thinner. Some drilling on the trunk lid may be needed in order to have the necessary mounting points available for the ZL1 1LE style wing.

C7 Carbon · 05-29-2019, 10:42 AM

Thanks again for your orders guys. Our factory is working on cranking out as many as we can per week.. Thank you again for everyone's patience!

Tango1LE · 07-13-2019, 02:49 PM

Quote:

Originally Posted by Biscuit.fr

even with the short pylons it has an angle...
I like it more every day

Tried it last sunday with a shot at 150!
No vibrations, you can almost feel the down force, car was sticking to the road!
But got it just for the great looking, not for the race.
I recommend.

some more pictures after a bath and outside....

This looks great! It lined up with the ZL1 holes or did you have to redrill?

hammdo · 07-13-2019, 03:48 PM

Locks good on the 5th gen too:

C7 has a great product!

-Don

OVERPAR73 · 07-13-2019, 03:48 PM

Do you all make any wing for the convertible ZL1. Very interested if anyone has installed the high wing type and/or any pictures?

C7 Carbon · 07-16-2019, 03:08 PM

Quote:

Originally Posted by OVERPAR73

Do you all make any wing for the convertible ZL1. Very interested if anyone has installed the high wing type and/or any pictures?

The wing will fit on a convertible, but it leaves holes exposed and you will need to enlarge a couple holes slightly..

01-09-2019, 08:12 PM	#533
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804	even with the short pylons it has an angle... I like it more every day Tried it last sunday with a shot at 150! No vibrations, you can almost feel the down force, car was sticking to the road! But got it just for the great looking, not for the race. I recommend. some more pictures after a bath and outside.... Last edited by Biscuit.fr; 01-10-2019 at 03:52 AM.

01-15-2019, 04:35 PM	#539
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Sure, we can offer you an additional set of uprights. Just PM us your order # and the upright height you are interested in so we can make sure to sell you the correct set. Last edited by C7 Carbon; 01-16-2019 at 03:44 PM.

07-13-2019, 03:48 PM	#544
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Locks good on the 5th gen too: C7 has a great product! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

07-13-2019, 03:48 PM	#545
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	Do you all make any wing for the convertible ZL1. Very interested if anyone has installed the high wing type and/or any pictures? __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

01-10-2019, 05:31 AM	#534
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804	do you know where I can find the "X" decals on the side of the wing we can see on the OEM? I've seen it once, can't remember where it was... tried ebay, amazon.. Thanks if you have a link

01-10-2019, 08:18 PM	#535
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Awesome pics, thank you so much for sharing. Your ZL1 looks amazing!

01-11-2019, 06:25 PM	#536
Grumpy1 Drives: 2018 ZL1 Hyper Blue A10 Join Date: Jan 2018 Location: Covington LA Posts: 646	Biscuit, first off the car looks great!!!!!!! I can see the angle on the wings that I thought was missing on the previous pics. Only thing is my mind was made up on the stock pylons but now you have me thinking about getting the smaller ones. IMO the wing at that height seems to sit or flow better with the lines of the car. Decision, Decisions.......Sometimes I think I just put too much thought into things......Lol

01-11-2019, 09:36 PM	#537
Biscuit.fr Drives: Red hot ZL1 A10 2017 Join Date: Nov 2016 Location: MS Back to France (29) Posts: 804	Thank you all I like the short ones... But your choice ;-)

01-14-2019, 11:07 AM	#538
Wang Drives: 2010 Camaro 2LT & 2018 Camaro ZL1 Join Date: Jan 2011 Location: Vancouver,BC Posts: 14	Got mine from my wife for Christmas. Installed and looks amazing! A few things. I got a high pylons one, lookin great but I am kind of a picky guy, so will you sell short pylons as extra parts? Will you guys release any OEM replica pylons after? Just askin. Wings looks fantastic.

01-18-2019, 04:12 AM	#540
PittsburghCamaro Drives: 2018 SS 1LE Join Date: Jan 2019 Location: Pittsburgh Posts: 9	Looking for a SS 1LE wing! Nothing out that matches the mounting holes of the SS 1LE

01-19-2019, 07:59 PM	#541
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	The SS 1LE bolting pattern is different from the SS pedestal spoiler, as the 1LE spoiler is a bit thinner. Some drilling on the trunk lid may be needed in order to have the necessary mounting points available for the ZL1 1LE style wing.

05-29-2019, 10:42 AM	#542
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks again for your orders guys. Our factory is working on cranking out as many as we can per week.. Thank you again for everyone's patience!

User Name		Remember Me?
Password