[Bomicino]

Thought I'd include a couple pics of how little room there is to remove the cam phaser with the oil pump in place. With the 3 hours spent dicking with it, I could have pulled the engine, dropped the pan and removed the oil pump. Pick your poison I guess.

[6spdhyperblue]

thanks for posting. Really nice build.

Even doing h/c in 4th gens, which was considered easy, after I was done, I said never again. Going to pull it and do the engine work on a stand like a human being.

[gmcvt]

Originally Posted by Bomicino

Yes, M6. It's got some low speed, low rpm surge in first. Power is a little "spongy" when hitting it at a lower rpm compared to stock. With the little time I've had, it seems the remedy is just drop a gear to end up in the powerband. 3500 and up its responsive. My tire height may also be a contributing factor. At 28" tall, they're only .3" taller than stock, but I think the 1le height is in the upper 26s if I remember. I wanted a 28, because I've also bought a pair of 17x9s to put 28x10 Hoosiers on, and didn't want to freak out the traction control/abs. Stabbing it from a roll out, I did get some wheel hop, so some BMR goods is next on the list. Thanks for the kind words about my lay off. I'm a 14 year Hyundai tech, hoping things turn back around in a couple weeks.

Thanks for the feeback. Once your able to get to the intake/induction side addressed, that will be a nice boost there also. Man, 499...so darn close...
23 years in Honda parts/service here. This last couple of months had already been slowing down some but we are definately feeling the impact of the CV here also. We are pure commission with no guarantee so they can keep us here 50-60 hours per week and if we dont sell anything, we dont get paid anything. So of coarse it does not cost them a dime of employment. (Autonation)

[6spdhyperblue]

Any chance you can post a video of idle?

[Bomicino]

Here's to hoping this world gets back to normal ASAP.

[Fraxum]

OP are you getting the GM M6 bog tuned out?

[Bomicino]

I tried the video, but it says invalid file?? Any suggestions?

[Bomicino]

I dont know how to link it, but I put it on YouTube, search anthony bomicino. I'm unsure about the bog tuning. When stock I didn't experience any, like so many people have. That's why I didn't get the throttle body ported.

[wnta1ss]

Originally Posted by Bomicino

I'm unsure about the bog tuning. When stock I didn't experience any, like so many people have. That's why I didn't get the throttle body ported.

I think that Fraxum was talking about the drag racing bog, which could show when you get your Hoosiers and can actually hammer the car from a standing start. The M6 cars are known for this, I have seen it happen, also had owners tell me that it happened, this includes SS and ZL1.

[6spdhyperblue]

Idle sounds good. Amazing how the tune can make it sound so different than the other gmpp hot cam idle videos. Sounds like it’s on the mark

https://youtu.be/XsMsbLQ7mQw

[Bomicino]

I was unaware about a drag bog, I'll have to read up on that, thanks. Also, thanks for posting the video link.

[Bomicino]

Just a few pics cleaned up

[Fraxum]

Originally Posted by Bomicino

Just a few pics cleaned up

Nice!! Looks bad ass which it is.

[Scottyz]

Car looks great. Beautiful. Nice numbers too.