■■■■ ESS Performance Supercharger!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ralph@ESSTuning · 01-03-2018, 04:23 PM

Hey guys! I would like to introduce to you, the ESS Performance supercharger system for the Gen 5 Camaro SS! For those of you who are not familiar with ESS Tuning, we have been making some of the worlds finest superchargers for BMW, Lamborghini, Mercedes, and Audi for over 20 years! The same passion and craftsmanship that goes into every one of those kits, continues into our domestic supercharger line as well.

On top of that offer, we are doing something else that is absolutely unheard of in the industry. We are SO confident in our product, we are offering a 30 day money back guarantee on these systems. In other words, you can purchase the kit, install it, drive it for a bit, and send it back for a full refund if you aren't happy with it! (some restrictions apply).

Product Description

With over 22 years of producing and tuning state-of-the-art supercharger systems for a variety of platforms, ESS knows a thing or two about forced induction system design and integration. We've now taken our expertise into the American domestic market by designing a complete bolt-on supercharger system for the 5th generation Camaro SS that puts out a monstrous 600WHP/550WTQ on a stock LS3.
This system uses the renowned Vortech V3Si supercharger for proven performance and unparalleled reliability. A massive air to air intercooler keeps temperatures down while an innovative reverse-tension belt-drive system ensure optimal belt grip even during extreme racing conditions for extended periods. All of this comes along with an extremely robust, industry-leading bracket design, a complete fuel system including the latest generation Siemens Deka 880cc direct fit fuel injectors for unmatched overall performance and drivability, and a complete installation kit with all the hoses and hardware you'll need makes it the best complete kit on the market today.
If that's not enough, the supercharger system was designed to support a Vortech V7YSi supercharger that can be swapped straight in for power potential up to 1400HP with supporting engine and fuel system upgrades. The main bracket system, belt-drive system and intercooler/SC induction system were designed with extreme power in mind straight out of the box.
Features:

V-3 Si Vortech Supercharger
Massive Air to Air Intercooler (40x18x8)
10-Rib Reverse Tension Belt-drive System
(3) 10-Rib Idler Pulleys Made from Hard Anodized 6061-T6 Aluminum.
105mm LS3 Supercharger Pulley Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish
200mm ESS Crank Pulley Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish
Fluidampr Harmonic Balancer
Upgraded Fuel System (Latest Generation Siemens Deka 880cc Injectors, ZL1 Fuel Pump, and Custom Fuel Pump Controller)
HP Tuners nGauge Software Upload and Diagnostic Tool w/Perfectly Matched ESS ECU Software.
K&N High-Flow Air Filter
Vortech MaxFlow Bypass Valve
Innovative Reverse Tensioning Belt System
CNC'd Industry-leading Robust Bracket Design Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish
LS3 Crank Pin Kit Gen III
PCV 1-Way Valve System
CCV Kit
Complete Form Fit Silicone Intercooler Hoses Throughout.
Complete Hardware Installation Kit (w/all necessary bolts, spacers, and nuts)
ESS Custom Windshield Wiper Washer Fluid Reservoir and Relocation Kit.

Additional Information:
This kit is completely bolt-on and requires no custom fabrication. Comes with a custom windshield wiper fluid reservoir which allows you to maintain that functionality instead of completely removing it. Also, the kit comes with bracket adapters and all necessary hardware which allows for easy swapping between all 5th Gen model years (10-15).
Install Time: 10-14 hours with new fuel pump installation; 8-10 hours without fuel pump installation.

bandier · 01-03-2018, 04:56 PM

Nice deal!!!

Ralph@ESSTuning · 01-03-2018, 04:57 PM

Quote:

Originally Posted by bandier

Nice deal!!!

Tell your friends

Hixson · 01-04-2018, 08:30 AM

Killer deal - would have probably bit on this earlier this winter before I spent $5K on a full cam kit, headers, tune, tires, etc. Who knows maybe something like this will be around for next years budget

GL to everyone who jumps on this - lucky bastards

hammdo · 01-04-2018, 12:33 PM

Welcome to the forum! Looks like a nice kit.. hope you’ll be able to make CFest in Bowing Green!

-Don

Ralph@ESSTuning · 01-04-2018, 12:41 PM

Quote:

Originally Posted by hammdo

Welcome to the forum! Looks like a nice kit.. hope you’ll be able to make CFest in Bowing Green!

-Don

Thanks Don. I appreciate the kind words.

bct10985 · 01-04-2018, 07:08 PM

10 rib belt is nice, especially if you step up to the ysi.

JANNETTYRACING · 01-05-2018, 07:52 AM

Welcome to the forum

QUICRNU · 01-05-2018, 09:00 AM

Looks Nice and Welcome!

Any pics of it in the car?

Jayjellyfish212 · 01-05-2018, 12:28 PM

Quote:

Originally Posted by QUICRNU

Looks Nice and Welcome!

Any pics of it in the car?

I was looking forward to seeing installed pics too

Ralph@ESSTuning · 01-05-2018, 12:46 PM

Quote:

Originally Posted by QUICRNU

Looks Nice and Welcome!

Any pics of it in the car?

Quote:

Originally Posted by Jayjellyfish212

I was looking forward to seeing installed pics too

Im getting some rounded up for you guys at the moment. I should hopefully post some later on today.

Thanks for the interest.

Ralph@ESSTuning · 01-08-2018, 10:49 AM

All PM's replied to. Still 3 systems left at this time. Install photos are on the way, as well.

Ralph@ESSTuning · 01-08-2018, 04:40 PM

QUICRNU · 01-08-2018, 06:33 PM

Looks nice.

01-03-2018, 04:23 PM	#1
Ralph@ESSTuning Drives: 5th Gen Camaro SS Join Date: Sep 2017 Location: Arizona Posts: 61	■■■■ ESS Performance Supercharger!! Hey guys! I would like to introduce to you, the ESS Performance supercharger system for the Gen 5 Camaro SS! For those of you who are not familiar with ESS Tuning, we have been making some of the worlds finest superchargers for BMW, Lamborghini, Mercedes, and Audi for over 20 years! The same passion and craftsmanship that goes into every one of those kits, continues into our domestic supercharger line as well. On top of that offer, we are doing something else that is absolutely unheard of in the industry. We are SO confident in our product, we are offering a 30 day money back guarantee on these systems. In other words, you can purchase the kit, install it, drive it for a bit, and send it back for a full refund if you aren't happy with it! (some restrictions apply). Product Description With over 22 years of producing and tuning state-of-the-art supercharger systems for a variety of platforms, ESS knows a thing or two about forced induction system design and integration. We've now taken our expertise into the American domestic market by designing a complete bolt-on supercharger system for the 5th generation Camaro SS that puts out a monstrous 600WHP/550WTQ on a stock LS3. This system uses the renowned Vortech V3Si supercharger for proven performance and unparalleled reliability. A massive air to air intercooler keeps temperatures down while an innovative reverse-tension belt-drive system ensure optimal belt grip even during extreme racing conditions for extended periods. All of this comes along with an extremely robust, industry-leading bracket design, a complete fuel system including the latest generation Siemens Deka 880cc direct fit fuel injectors for unmatched overall performance and drivability, and a complete installation kit with all the hoses and hardware you'll need makes it the best complete kit on the market today. If that's not enough, the supercharger system was designed to support a Vortech V7YSi supercharger that can be swapped straight in for power potential up to 1400HP with supporting engine and fuel system upgrades. The main bracket system, belt-drive system and intercooler/SC induction system were designed with extreme power in mind straight out of the box. Features: V-3 Si Vortech Supercharger Massive Air to Air Intercooler (40x18x8) 10-Rib Reverse Tension Belt-drive System (3) 10-Rib Idler Pulleys Made from Hard Anodized 6061-T6 Aluminum. 105mm LS3 Supercharger Pulley Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish 200mm ESS Crank Pulley Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish Fluidampr Harmonic Balancer Upgraded Fuel System (Latest Generation Siemens Deka 880cc Injectors, ZL1 Fuel Pump, and Custom Fuel Pump Controller) HP Tuners nGauge Software Upload and Diagnostic Tool w/Perfectly Matched ESS ECU Software. K&N High-Flow Air Filter Vortech MaxFlow Bypass Valve Innovative Reverse Tensioning Belt System CNC'd Industry-leading Robust Bracket Design Made from 6061-T6 Aluminum and Hard-Anodized in a Matte Black Finish LS3 Crank Pin Kit Gen III PCV 1-Way Valve System CCV Kit Complete Form Fit Silicone Intercooler Hoses Throughout. Complete Hardware Installation Kit (w/all necessary bolts, spacers, and nuts) ESS Custom Windshield Wiper Washer Fluid Reservoir and Relocation Kit. Additional Information: This kit is completely bolt-on and requires no custom fabrication. Comes with a custom windshield wiper fluid reservoir which allows you to maintain that functionality instead of completely removing it. Also, the kit comes with bracket adapters and all necessary hardware which allows for easy swapping between all 5th Gen model years (10-15). Install Time: 10-14 hours with new fuel pump installation; 8-10 hours without fuel pump installation. Last edited by Ralph@ESSTuning; 01-16-2018 at 11:05 AM.

01-03-2018, 04:56 PM	#2
bandier Got mine! Drives: 2021 LT1 RS - Orange Crush Join Date: Mar 2011 Location: Fallbrook, CA Posts: 1,295	Nice deal!!! __________________ Camaro lover since 1984 when I got my first car a 1978 Camaro LT with a 2 barrel carb on 305 V8... yes I put in a 350 with a 4 barrel.

01-04-2018, 12:33 PM	#5
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,690 View My Garage	Welcome to the forum! Looks like a nice kit.. hope you’ll be able to make CFest in Bowing Green! -Don __________________ 747 RWHP 794 RWTQ "Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577

01-04-2018, 07:08 PM	#7
bct10985 Drives: 2010 2SS LS3, 2013 duramax Join Date: Nov 2012 Location: Dover, De Posts: 1,451	10 rib belt is nice, especially if you step up to the ysi. __________________ ECS Ysi-B, cam, Tsp 2" longtubes, Squash dual pumps, Id1300s, meth, 4L80e, FTI 3600, ZL1 3.73 diff, BMR suspension, 15" conversion, weld rts mt 275 et street R. 9.6@147mph

01-05-2018, 07:52 AM	#8
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,223	Welcome to the forum __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

01-04-2018, 08:30 AM	#4
Hixson Drives: 2015 Camaro 1SS L99 Join Date: Apr 2016 Location: Quad Cities, Iowa Posts: 623 View My Garage	Killer deal - would have probably bit on this earlier this winter before I spent $5K on a full cam kit, headers, tune, tires, etc. Who knows maybe something like this will be around for next years budget GL to everyone who jumps on this - lucky bastards

01-05-2018, 09:00 AM	#9
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	Looks Nice and Welcome! Any pics of it in the car? __________________ Apex Focused

01-08-2018, 10:49 AM	#12
Ralph@ESSTuning Drives: 5th Gen Camaro SS Join Date: Sep 2017 Location: Arizona Posts: 61	All PM's replied to. Still 3 systems left at this time. Install photos are on the way, as well.

01-08-2018, 04:40 PM	#13
Ralph@ESSTuning Drives: 5th Gen Camaro SS Join Date: Sep 2017 Location: Arizona Posts: 61

01-08-2018, 06:33 PM	#14
QUICRNU Drives: Z06 wannabe Join Date: Feb 2015 Location: Daytona Beach, FL Posts: 1,200	Looks nice. __________________ Apex Focused