Engine mounts

[_Onyx_Wolf_]

Originally Posted by Chris49066SS

How did you get delrin? Mine are true solid aluminum pucks, which they offer as an upgrade to the polyurethane. I had never seen them offer motor mounts with delrin "DERLIN" as some say lol, bushings. Mine are sitting on my bench waiting to get installed

Lolz they might be aluminum then got the same as u and install them Mann haha they are great

[Dbunch9]

I installed those same motor mounts and I didn’t have to remove my headers. I will say though, after install I went from terrible wheel hop to zero wheel hop

[gunchamp]

Originally Posted by InFiD3ViL

I want more shake with my lope, so if that's on the menu then I'm all for it...along with the other benefits.

It is and its not a bad thing. I like the feel. Great mod

[Scotty D]

Definitely a lot more road noise but I love it

[Chris49066SS]

Originally Posted by Scotty D

Definitely a lot more road noise but I love it

Scotty, how did you do yours, did you jack up the motor by the oil pan?

[Scotty D]

Originally Posted by Chris49066SS

Scotty, how did you do yours, did you jack up the motor by the oil pan?

Yup i did just that
I used a piece of 2 x 4 in between the jack & the oil pan
So i my mind the wood acted as a cushion so that it would flex where the metal wouldn’t have from the Jack and maybe would’ve hurt the pan
Worked great

[gunchamp]

Did the same. Already had my top end torn down, but wood on the pan and jacked it up. Wasnt too bad

[Chris49066SS]

Originally Posted by gunchamp

Did the same. Already had my top end torn down, but wood on the pan and jacked it up. Wasnt too bad

Did you do a trans mount along with it?

[Scotty D]

Originally Posted by Chris49066SS

Did you do a trans mount along with it?

No !!
Going to do that when i do my clutch & driveshaft

[gunchamp]

Originally Posted by Chris49066SS

Did you do a trans mount along with it?

I didnt. Just wasnt sure if i wanted the extta vibration. Changed so much just wanted to wait and see. Probaly will do it eventually

[Chris49066SS]

Originally Posted by Scotty D

No !!
Going to do that when i do my clutch & driveshaft

I have heard stories of people cracking their bellhousing by going to a solid motor mount without upgrading the trans mount as well, my issue is that I will be going the way of a TH400 eventually so I am leary of throwing money away on a 6L80 mount just to swap it out anyway. Decisions, decisions

[gunchamp]

Originally Posted by Chris49066SS

I have heard stories of people cracking their bellhousing by going to a solid motor mount without upgrading the trans mount as well, my issue is that I will be going the way of a TH400 eventually so I am leary of throwing money away on a 6L80 mount just to swap it out anyway. Decisions, decisions

I read the same, but couldnt find anyone who actually had it happen. And Im running BMR poly so a touch more forgiving than a solid. Guess I'll test it and see what happens lol.