07-03-2017, 01:56 AM | #1 |
Drives: New : 2017 SS 1LE Old: 2012 TTRS M6 Join Date: Oct 2015
Location: Calgary/Vancouver
Posts: 810
|
for those looking to install aftermarket seats or buy 1LE Recaros....
here's a teaser... Planted Technologies used my 1LE as a prototype mule for their new Gen6 Camaro Brackets... production versions will become available soon.....
for those wondering.... Stock 1LE Recaros ( same as ZL1 with heaters and fans) weigh 56 lbs a piece I installed the PLanted Steel Brackets ( pwder coated black 11 lbs a piece) Sparco Aluminum 90* Seat Mounts ( powder coated yellow , 4 lbs a piece) KEVLAR (not GRP) Cobra Suzuka GT's ( custom stitching with NASA OUTLAST fabric, 20 lbs a piece) 31 lbs for each seat, meaning 50 lbs of total weight savings... MOST IMPORTANTLY... I can finally use the insane grip levels of this car in complete confidence/security as the seat wraps around you and anchors you in a way no stock street seat can.... ( these are FIA certified motorsport seats) The 1LE seats are great 95% of the time... but I run this car thru canyons hard and very often. Soon it will be going on the track as well... and I no longer have to brace anchor myself at all for those instant or sustained high G turns where you want to keep a light touch on the wheel... for those interested in buying my original Recaro seats, you will no find a better street seat for looks, comfort, support and bolstering.... ( heated and ventilated... just needs to be enabled) http://www.camaro6.com/forums/showthread.php?t=490124 PM me. http://i206.photobucket.com/albums/b...C75555A1EA.png http://i206.photobucket.com/albums/b...C75555A1EA.png
__________________
.
. https://www.wheelwell.com/profile/56...ed9c3a/garage/ . . Project 1LE Wraith: http://www.camaro6.com/forums/showthread.php?t=474068 Last edited by aa406079; 07-10-2017 at 04:27 AM. |
07-03-2017, 02:16 AM | #2 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
Those seats are fantastic. Love them
Glad you finally got them in. I will have to keep an eye open for those brackets. Look like a great fit.
__________________
|
07-03-2017, 05:49 AM | #3 |
Drives: 2017 Camaro 1SS M6 Join Date: Apr 2015
Location: Indy
Posts: 2,460
|
How much did that setup cost?
__________________
2017 Camaro 1SS, M6, Hurst shifter, Hyper Blue, NPP, Gray Split Spoke Wheels
Best 1/4 Mile: 12.24 @ 115.9 mph |
07-03-2017, 07:13 AM | #4 |
Drives: SS Join Date: Jan 2017
Location: Oakland, CA
Posts: 152
|
Subbed
|
07-03-2017, 09:17 AM | #5 |
Drives: New : 2017 SS 1LE Old: 2012 TTRS M6 Join Date: Oct 2015
Location: Calgary/Vancouver
Posts: 810
|
I bought my seats directly from the UK where Cobra Seats are manufactured to take advantage of the very favourable Pound Sterling.( GO BREXIT!) I am fortunate to be a long haul pilot so I picked them up myself on a London layover after custom ordering a month or two beforehand. the Kevlar seats are about $1000 each...before customization... I order with proprietary Outlast Material which is used be NASA in space suits and bomb disposal armour to regulate body/seat temperature... I bought an extra square meter for about 90 £. Going to wrap the seat belt and some of the interior pieces to match the seats. Planted Brackets should be about $140 My side mounts were about $100 per sliders about $70 per install about 2 hrs per seat ( the first time to properly situate and position the seats) today I pulled 1 G sustained for several seconds and was so relaxed in the seat I could look down and read the G meter on the HUD without any drama.... I couldn't do that before.
__________________
.
. https://www.wheelwell.com/profile/56...ed9c3a/garage/ . . Project 1LE Wraith: http://www.camaro6.com/forums/showthread.php?t=474068 Last edited by aa406079; 07-03-2017 at 09:28 AM. |
07-03-2017, 09:36 AM | #6 |
Drives: 2016 SS M6, NPP Join Date: Apr 2016
Location: Hawthorne, CA
Posts: 1,957
|
Nice, I put up a thread for any Camaro 6th gen for Planted last year and finally someone took their car there! Been waiting on the seat brackets forever!
http://www.camaro6.com/forums/showth...d+seat+bracket Looks good, did you use a resistor for the airbag light? Passenger sensor? |
07-03-2017, 11:05 AM | #7 |
Drives: 2002 Camaro SS Join Date: Jun 2012
Location: Evansville, Indiana
Posts: 526
|
Looks great.
__________________
2017 1SS Hyper Blue M6
2001 Ford Lightning |
07-11-2017, 04:31 PM | #8 |
Drives: 2016 Camaro RS 4cyl Turbo Join Date: Oct 2016
Location: California
Posts: 34
|
How did you get the airbag light to stay off?
|
12-13-2017, 04:33 PM | #9 |
IG: Limitless2ss
Drives: 2016 camaro 2ss Join Date: Apr 2016
Location: san jose
Posts: 68
|
[QUOTE=Mrwanton;9813352]How did you get the airbag light to stay off?[/Q
i would also like to know this?.
__________________
IG: Limitless2ss Borla ATAK, Eibach Pro-kit Springs,OE Front splitter |
03-03-2021, 12:22 PM | #10 |
Drives: 2021 Chevy Camarp Join Date: Dec 2020
Location: Houston
Posts: 5
|
Is anybody selling there 1LE seats?
|
|
|
Post Reply
|
|
|