New Brembo Brake Pads - Fronts and Rears ('10-'15 Camaro) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camaro162 · 02-06-2022, 07:03 PM

Hi everyone! I have a full front and rear set of brand new, never installed Brembo brake pads, and I don't have a use for them. I'd like to find someone who can use them, and get them out of my garage:

These are for Brembo GT 6-piston (front) and 4-piston (rear) systems.

The markings on the pads are as follows:

Set #1:
"Brembo 07.9551.13" ; "FERODO HP 1000":"RACING INSPIRED"

Set #2:
"Brembo 07.8645.16"; "FERODO FM1000 FFA14"; RACING INSPIRED"; "319"

To confirm their application, I e-mailed Brembo, and the following is what they told me about the pads:

Front (07.9551.13 Pad Number) pads;
Ferodo FM1000 street compound for wide annulus 6-piston“N” system. These pads are used in our “N” calipers, these are 6-piston calipers that are used in conjunction with a wide annulus disc. Standard annulus is roughly 53mm in our GT systems, with wide annulus being 61.5mm. So these pads are designed to account for the additional ~8.5mm of disc surface area. Any of our systems that have “N” as the 2nd character would use this pad shape.

Rear (07.8645.16 Pad Number) pads;
Ferodo FM1000 street compound for standard annulus4-piston B/H/P systems. These pads are used in most of our 4-piston systems and can be used with 345x28mm – 380x28mm disc assemblies.

I do not have the original packaging or the hardware.

Asking $300 OBO + shipping (they weigh ~14lbs, if you want to estimate the cost) from NYC metro area. I will not separate - must buy all 8 pads.

Camaro162 · 03-08-2022, 06:04 AM

^Make an offer (I want these gone...) :-)

daschae · 11-07-2022, 08:32 AM

Do you still have these? I need the 07.9551.13

daschae · 11-07-2022, 12:01 PM

FYI, I got a PM from berrytega telling me to email partsa33@gmail.com to buy these. I ALMOST paypal'd money but realized I was down a rabbit hole of email here, then here, then send money here via paypal friends and family. Etc.

olblue75 · 11-07-2022, 04:02 PM

Will any of these work on the Z28 rotor thats been converted to iron via the Giro Disc conversion??

Camaro162 · 11-13-2022, 06:36 PM

Quote:

Originally Posted by daschae

Do you still have these? I need the 07.9551.13

Hi! Yes - I do still have these pads! Shoot me a PM if you're still interested.

Camaro162 · 01-19-2024, 12:05 PM

These are still available! ...anybody?

11-07-2022, 04:02 PM	#5
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	Will any of these work on the Z28 rotor thats been converted to iron via the Giro Disc conversion?? __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

02-06-2022, 07:03 PM	#1
Camaro162 Drives: '15 Cam Join Date: Feb 2022 Location: NY Posts: 4	New Brembo Brake Pads - Fronts and Rears ('10-'15 Camaro) Hi everyone! I have a full front and rear set of brand new, never installed Brembo brake pads, and I don't have a use for them. I'd like to find someone who can use them, and get them out of my garage: These are for Brembo GT 6-piston (front) and 4-piston (rear) systems. The markings on the pads are as follows: Set #1: "Brembo 07.9551.13" ; "FERODO HP 1000":"RACING INSPIRED" Set #2: "Brembo 07.8645.16"; "FERODO FM1000 FFA14"; RACING INSPIRED"; "319" To confirm their application, I e-mailed Brembo, and the following is what they told me about the pads: Front (07.9551.13 Pad Number) pads; Ferodo FM1000 street compound for wide annulus 6-piston“N” system. These pads are used in our “N” calipers, these are 6-piston calipers that are used in conjunction with a wide annulus disc. Standard annulus is roughly 53mm in our GT systems, with wide annulus being 61.5mm. So these pads are designed to account for the additional ~8.5mm of disc surface area. Any of our systems that have “N” as the 2nd character would use this pad shape. Rear (07.8645.16 Pad Number) pads; Ferodo FM1000 street compound for standard annulus4-piston B/H/P systems. These pads are used in most of our 4-piston systems and can be used with 345x28mm – 380x28mm disc assemblies. I do not have the original packaging or the hardware. Asking $300 OBO + shipping (they weigh ~14lbs, if you want to estimate the cost) from NYC metro area. I will not separate - must buy all 8 pads. Attached Images Last edited by Camaro162; 02-26-2024 at 06:09 AM. Reason: update

03-08-2022, 06:04 AM	#2
Camaro162 Drives: '15 Cam Join Date: Feb 2022 Location: NY Posts: 4	^Make an offer (I want these gone...) :-)

11-07-2022, 08:32 AM	#3
daschae Drives: F150 Velociraptor Join Date: Nov 2022 Location: Chandler AZ Posts: 2	Do you still have these? I need the 07.9551.13

11-07-2022, 12:01 PM	#4
daschae Drives: F150 Velociraptor Join Date: Nov 2022 Location: Chandler AZ Posts: 2	FYI, I got a PM from berrytega telling me to email partsa33@gmail.com to buy these. I ALMOST paypal'd money but realized I was down a rabbit hole of email here, then here, then send money here via paypal friends and family. Etc.

01-19-2024, 12:05 PM	#7
Camaro162 Drives: '15 Cam Join Date: Feb 2022 Location: NY Posts: 4	These are still available! ...anybody?