HP tuner/scanner MPVI2 data log screen question - Page 2

lt4camaro · 06-16-2022, 12:20 PM

Quote:

Originally Posted by 6spdhyperblue

What are your mods? Tune?

E85, LT2 intake, stock air box opened up on the lower front, green air filter, airaid intake tube, conservative dyno tune By Ted Jannetty. The datalog was done on straight 93 octane. I can send you the entire data log to your email if you want to see it. I tried to attach it here but I am doing something wrong. And a 180 stat with fans coming on sooner

Choda · 06-16-2022, 12:40 PM

my 2016 SS shows 84% when WOT also

6spdhyperblue · 06-16-2022, 12:52 PM

If Ted did it. It’s likely ok. It’s probably a different channel displayed in the scanner. Maybe one is sae and the other isnt

lt4camaro · 06-16-2022, 01:00 PM

Quote:

Originally Posted by 6spdhyperblue

If Ted did it. It’s likely ok. It’s probably a different channel displayed in the scanner. Maybe one is sae and the other isnt

My thoughts also, Laynlo and I have been sharing some info and on his screen shot, the left side list has different stuff and the throttle position doesnt say SAE and he is at 99.6.

Megahurtz · 06-18-2022, 09:51 PM

You have to monitor the hi-res channel and not the SAE channel and it will show 99.6% Add the proper channel in the scanner and delete the SAE one. Look over on HPTuner forum as well for more details.

lt4camaro · 06-19-2022, 12:14 PM

Quote:

Originally Posted by Megahurtz

You have to monitor the hi-res channel and not the SAE channel and it will show 99.6% Add the proper channel in the scanner and delete the SAE one. Look over on HPTuner forum as well for more details.

Thanks Bud...

06-16-2022, 12:40 PM	#16
Choda Drives: Turbo 6.2 Join Date: Feb 2019 Location: Buffalo Posts: 702	my 2016 SS shows 84% when WOT also __________________ 2016 Turbo Camaro SS - 800hp/900tq 9.7@146 2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100

06-16-2022, 12:52 PM	#17
6spdhyperblue Drives: 6th gen Join Date: Aug 2013 Location: US Posts: 3,670	If Ted did it. It’s likely ok. It’s probably a different channel displayed in the scanner. Maybe one is sae and the other isnt __________________ ‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122 ‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold)

06-18-2022, 09:51 PM	#19
Megahurtz Snackbar Tuning Drives: 2023 SGM ZL1 Join Date: Oct 2016 Location: Florida Posts: 1,105	You have to monitor the hi-res channel and not the SAE channel and it will show 99.6% Add the proper channel in the scanner and delete the SAE one. Look over on HPTuner forum as well for more details.

User Name		Remember Me?
Password