[Apex Wheels]

Here's a couple of nice photos from our customer @red_fury_zle rocking a set of staggered 19" ARC-8s in Anthracite finish!

APEX Wheel Fitment Specs:

• Front: 19x11" ET11
• Rear: 19x12" ET41

[Apex Wheels]

Famous Racing 5th gen Chevy Camaro Race Car with 18" EC-7 Wheels at COTA

APEX Wheel Fitment Specs:

• Front: 18x10.5" ET27 in Anthracite finish with 315/680-18 Pirelli Slicks
• Rear: 18x11" ET44 in Anthracite finish with 325/705-18 Pirelli Slicks
• BMW Fitment; requires hub centric rings

[Apex Wheels]

Some more great photos from our customer Kunal of his 2018 Camaro SS1LE on 19" ARC-8s in Satin Black finish.

APEX Wheel Fitment Specs:

• Front: 19x11" et11 ARC-8 with 305/30-19 Goodyear Eagle F1 tires
• Rear: 19x12" et41 ARC-8 with 325/30-19 Goodyear Eagle F1 tires
• Suspension: ZL1 1LE DSSV full suspension
• Alignment: -3.6° camber in front and -2.4° in back

Owner's Instagram: @kunal_the_foodie

[Chef-j]

Wahh looks hot!

[Apex Wheels]

Some nice photos of our customer Greg's mean looking 6th gen SS on SM-10 wheels in Satin Black finish.

APEX Wheel Fitment Specs:

• Front/Rear:19x10.5" ET22 square with 305/30-19 Michelin PS4S tires
• Additional fitment notes: No spacers (ground down front suspension, non mag-ride), -1.5* camber front and rear

[Apex Wheels]

Camaro ZL1 1LE on 18" Anthracite SM-10s

APEX Wheel Fitment Specs:

• Front/Rear: 18x11" ET35 with 315/680-18 Pirelli DH Slicks
• Alignment: -3.5 degrees camber in front and -2.5 in back
• 26mm front spacer with extended studs

[Apex Wheels]

Tyler Clark's "Shocker Camaro"

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET35 APEX SM-10 in Satin Black with 305/30-19 Goodyear Eagle 3R tires
• Additional mods: APEX 26mm spacer in front with ARP extended studs
• Alignment: -2.3 degrees camber in front and -1.5 in back

[sr71bb]

Originally Posted by APEXRaceParts

Tyler Clark's "Shocker Camaro"

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET35 APEX SM-10 in Satin Black with 305/30-19 Goodyear Eagle 3R tires
• Additional mods: APEX 26mm spacer in front with ARP extended studs
• Alignment: -2.3 degrees camber in front and -1.5 in back

OK just to be clear you are running basically a ONE INCH (26MM) spacer on the front wheels or is that a MISPRINT???

[Apex Wheels]

Originally Posted by sr71bb

OK just to be clear you are running basically a ONE INCH (26MM) spacer on the front wheels or is that a MISPRINT???

Sorry for the late reply, looks like we missed this one. That is correct, the car pictures is running a 26mm front spacer along with ARP extended studs. This is a fairly common fitment for track driven Camaros as a large spacer must be used if looking to run a rotatable square setup. We have seen countless customers run this size spacer on track and street without issue provided high quality studs of the correct length are used.

-Ian

[Apex Wheels]

Marks Red Hot Camaro SS looking gorgeous one a square set of APEX SM-10 wheels in Anthracite finish.

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET35 with 305/30-19 Goodyear Eagle SC3R Tires
• Additional mods: 26mm front spacer with ARP extended studs

Photography: @ariesphoto7

[DaggerMouth]

Originally Posted by APEXRaceParts

Marks Red Hot Camaro SS looking gorgeous one a square set of APEX SM-10 wheels in Anthracite finish.

APEX Wheel Fitment Specs:

• Front/Rear: 19x11" ET35 with 305/30-19 Goodyear Eagle SC3R Tires
• Additional mods: 26mm front spacer with ARP extended studs

Photography: @ariesphoto7

I think you won a new customer with this setup. Love the look!

[sr71bb]

Originally Posted by DaggerMouth

I think you won a new customer with this setup. Love the look!

Well I wouldnt run that on the street for any length of time. The tire poke at the top of the front wheel will result in potentially some rock chip damage on the fender no doubt.

I run APEX EC-7 18 x 11 ET27 wheels with a 5MM spacer and even with MICHELIN slicks 30 68 18 , I DONT have tire poke at the top of the wheel.

On the street I run APEX 19 x 10.5 SM-10 ET25 wheels with 305 30 19 tires WITHOUT a front spacer and I dont have tire poke at the top of the wheel.

IMO it is NEVER a good idea to have tire poke at the TOP of the wheel well. I also think running what amounts to be ONE INCH spacer on the front wheel is NOT desirable.

[Bwaahhh]

The SM-10s 305 all around is what I want to go with like the shock and red hot above. I would love to connect with those two to see how back rock chips are......

[kropscamaro16]

Originally Posted by Bwaahhh

The SM-10s 305 all around is what I want to go with like the shock and red hot above. I would love to connect with those two to see how back rock chips are......

this is marks fb page if you want to send him a message nice guy hes up in norcal



https://www.facebook.com/MantisMark