08-18-2016, 04:49 PM | #1 |
Drives: 2016 Camaro SS Join Date: Mar 2016
Location: Staten Island, NY
Posts: 39
|
LED front turn signals!!!!
Has anyone found a kit or know how to change the horrible front halogen bulbs to LED ??????? I did all the other bulbs around the car but didn't do the fronts yet
|
08-18-2016, 04:52 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,826
|
you talking about turn signal in headlights or sidemarker?
|
08-18-2016, 05:33 PM | #3 |
Drives: 2016 Camaro SS Join Date: Mar 2016
Location: Staten Island, NY
Posts: 39
|
Front turn signal
|
08-18-2016, 05:55 PM | #4 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,826
|
just google the size on autozone or pepboys and get one! i was going to order some switchbacks but i dont care that much yet
rather have led back up lights |
08-18-2016, 06:32 PM | #5 |
Drives: 2016 Camaro SS Join Date: Mar 2016
Location: Staten Island, NY
Posts: 39
|
Like I said I did all the other lights on the car already !!!! I was asking if anyone found a kit or did them yet because switching out the bulbs is probably going to cause hyper flash !!!!
|
08-18-2016, 06:53 PM | #6 |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
Did mine months ago, there is a thread about it here somewhere. Don't need a kit just get the correct led bulbs and resistors and your done. I used Sylvania 7440 LEDs. Same as the reverse bulbs.
|
08-18-2016, 08:32 PM | #7 |
Drives: 2016 Camaro SS Join Date: Mar 2016
Location: Staten Island, NY
Posts: 39
|
I'll try and find it !! Thanks !! If by any chance you come across the thread can you send me the link?
|
08-18-2016, 08:51 PM | #8 | |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
Quote:
|
|
08-18-2016, 10:04 PM | #9 |
Drives: 2016 Camaro SS Join Date: Mar 2016
Location: Staten Island, NY
Posts: 39
|
Awesome!! Thank you
|
08-18-2016, 11:49 PM | #10 |
Drives: '16 2SS GD1 MX0 NPP F55 IO6 Join Date: Jun 2013
Location: Florida
Posts: 1,298
|
Same as the reverse lights? So the Gen5Diy load resistor for the reverse lights could work for the headlamp turn signals with LED's?
|
08-19-2016, 12:35 AM | #11 |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
|
08-19-2016, 07:28 AM | #12 |
Drives: 2016 camaro 2ss NGM Join Date: May 2015
Location: Georgia
Posts: 342
|
bought some switchbacks from ijdmtoy and they came with the resistors built in so it was just plug and play. all i did was add electrical tape and zipties
|
08-19-2016, 08:41 AM | #13 |
Drives: 2020 Camaro 2SS Join Date: Aug 2009
Location: Sherman,Texas
Posts: 844
|
|
08-27-2016, 10:42 AM | #14 |
Drives: 2016 Camaro SS Join Date: Mar 2016
Location: Staten Island, NY
Posts: 39
|
I'm thinking of using the same resistor I used for the back up light!!! It's the one that lethal hammer used it plugs in between the bulb and the stock plug!!! I'm pretty sure that will do it!!! I try to do a lot of research before I start crap like this because my 13 ram was a nightmare just to do hid's lol
|
|
|
Post Reply
|
|
|