01-18-2021, 11:01 AM | #15 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
you guys doing passenger seat also or just leaving it stock or out of car? lol
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
01-18-2021, 12:28 PM | #16 |
Drives: Camaro 1ss Join Date: Nov 2019
Location: Wisconsin
Posts: 495
|
My passenger seat is stock for now. Until I feel like spending the money for my passengers.
__________________
Follow me on IG for build thread! https://www.instagram.com/tracked_1ss/
YouTube: https://www.youtube.com/@Tracked_1ss FortuneAuto Coilovers! https://shop-fortune-auto.com/produc...ries-coilovers |
01-18-2021, 12:28 PM | #17 |
Drives: 2020 Camaro LT1 Join Date: Mar 2020
Location: FL
Posts: 37
|
I personally tend to take passenger seat out on track days. Installing this to solve a problem much more than for style. I may decide to do the passenger seat as well if the look bothers me too much. I'm for sure planning to do a DIY rear seat delete kit. I can just pull those bastards out on Autocross days because the buffeting at lower speeds isn't all that serious, but for HPDE no thank you.
|
01-18-2021, 01:07 PM | #18 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
haha yea im waiting on my rear seat delete then going to get a seat/harness and cage setup but probably will leave stock 1ss seat in passenger siide
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
01-23-2021, 01:22 PM | #19 |
Drives: 2020 Camaro LT1 Join Date: Mar 2020
Location: FL
Posts: 37
|
So I went to do the install today without the wiring harness. I was prepared to deal with the airbag light on for the short term until I get the harness and ran into what I considered to be an issue.
I realized that the seat belt buckle itself is attached to the wiring harness and I REALLY don't want the annoying "buckle your seatbelt" chime going off non-stop. D'oh! Does anyone know what happens if you just leave that part disconnected? |
01-23-2021, 03:59 PM | #20 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
I wish I could tell you, I never tried it without the stock belts plugged in. Only one way to fi d out I guess ....
|
01-23-2021, 06:06 PM | #21 |
Drives: 2020 Camaro LT1 Join Date: Mar 2020
Location: FL
Posts: 37
|
Yup, you are correct. I guess I'll just order the damned harness. Need to use the car tonight and didn't care to listen to the chime every few seconds. Can you please post a link to the one you ordered?
|
01-24-2021, 07:09 AM | #22 |
|
I haven't done this yet, but I'm told others have.
Go to your local Chevy dealer and have parts order a seat belt extender. They are free. Cut the webbing from the part that inserts into the stock buckle. Insert it when you are using your harness. Keeps the seat belt warning system from activating.
__________________
|
01-24-2021, 01:02 PM | #23 | |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
Quote:
|
|
01-24-2021, 05:27 PM | #24 |
Drives: Camaro 1ss Join Date: Nov 2019
Location: Wisconsin
Posts: 495
|
There is no seat belt chime if you remove the belt from the car
__________________
Follow me on IG for build thread! https://www.instagram.com/tracked_1ss/
YouTube: https://www.youtube.com/@Tracked_1ss FortuneAuto Coilovers! https://shop-fortune-auto.com/produc...ries-coilovers |
01-26-2021, 08:57 PM | #25 |
Drives: 2020 Camaro LT1 Join Date: Mar 2020
Location: FL
Posts: 37
|
Yup. I did that test last night. All that happens is the same airbag light as when you take out the passenger seat, so not really a big deal IMO.
Unfortunately, the Sparco base/bracket is designed TERRIBLE. It is literally impossible to use without modifying. The problem is that on the inner side you can not fit the bolt no matter which way you go to turn it. I'm going to have to drill out a hole so I can fit the bolt through. Not the end of the world, but not what you expect from a reputable company to say the least. TLDR; buy the BK bracket. |
01-26-2021, 08:59 PM | #26 |
Drives: 2020 Camaro LT1 Join Date: Mar 2020
Location: FL
Posts: 37
|
Don't know what they were thinking...
|
01-26-2021, 10:28 PM | #27 |
Drives: 17 hyper blue 2SS M6 Join Date: Mar 2018
Location: NorCal
Posts: 594
|
|
01-27-2021, 05:11 AM | #28 |
|
I'm going the BK route, it's an adventure for sure and expensive. Using R-9061 Side Mount Brackets for Sparco Evo-2 US & Sparco Corsa
|
|
|
Post Reply
|
|
|