[Tay]

Originally Posted by carguy55

It's been proven the hard way that the airbags still function when the light is on. I also talked to the guy at Gen5DIY about this issue, but he can only say he's working on it. Haha, just noticed this post is over 2 years old

Did you talk to Gen5DIY about this recently?

[Tay]

Originally Posted by Baddawg53

Just buy the seat wiring harnesses. 84280995 for the passenger side and 84280991 for the driver's side. Get a resistor for the airbag, swap over memory function control module, passenger occupancy sensor.

Super simple.

Thanks for the info. Very helpful.

Do you think it matters that harness states "Without recaro seat"?

All the other versions are discontinued.

[Baddawg53]

Originally Posted by Tay

Thanks for the info. Very helpful.

Do you think it matters that harness states "Without recaro seat"?

All the other versions are discontinued.

I don't see how it would matter, you're only using the seat belt plugs, the airbag, and the passenger seat occupancy sensor plugs. I can't imagine they're different on recaros.

[Tay]

Originally Posted by Baddawg53

I don't see how it would matter, you're only using the seat belt plugs, the airbag, and the passenger seat occupancy sensor plugs. I can't imagine they're different on recaros.

I figured. Thanks.

[Tay]

Originally Posted by Baddawg53

Just buy the seat wiring harnesses. 84280995 for the passenger side and 84280991 for the driver's side. Get a resistor for the airbag, swap over memory function control module, passenger occupancy sensor.

Super simple.

One more question, is the resistor for the 2.2 ohm?

[Baddawg53]

Originally Posted by Tay

One more question, is the resistor for the 2.2 ohm?

I'll measure it when I get a chance, might be a few days, here is the link to the one I used.

https://www.automotivecircuitsolutio...iagnostic-tool

[Tay]

Originally Posted by Baddawg53

I'll measure it when I get a chance, might be a few days, here is the link to the one I used.

https://www.automotivecircuitsolutio...iagnostic-tool

Awesome! Thanks a lot!

[wintee4478]

Originally Posted by Yenkocrew

I decided to swap out my drivers seat for a full blown track setup. I choose the Sparco Alpha vs the Sparco EVO II. The Alpha is a wider seat then the EVO II but the shoulder harness holes are better suited for a lengthy torso individual.

I used the Planted 6th Gen seat mount with OMP sliders. I had to mount the seat directly to the sliders to gain enough head/helmet space since I also have a sunroof making the available height 1" less.

I also wanted to retain all the OE seat belt components as well as keeping the other 9 airbags functional in the car. To do this I striped the Drivers seat harness out and used it as a template to design my own version that only contains the critical wiring for the SRS system. The car is a fully optioned 2016 2SS so seat heater/cooling is removed.

I designed a harness that defeats the airbag light and SRS system keeping the airbags functional.

Currently waiting to install the BK Auto harness bar and rear seat delete kit. Added some pics for those curious. Also thinking about making full SRS delete kits for both driver and passenger seats.

Anyone interested? PM me and if there is enough interest I'll dedicate the time to build the full delete kit or specific driver/passenger options.

i am trying to the same thing except with a sparco evo xl and i do not know where to start i would really appreciate a full delete kit ill pay u for one

[Baddawg53]

Originally Posted by Tay

One more question, is the resistor for the 2.2 ohm?

Sorry for the delay, it's 2.4 ohms. I'm not going to say that's the "correct" one, but I'll tell you it works.