06-13-2020, 04:15 PM | #1 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,363
|
Performance Shop- who to use ?
What shop do you guys recommend to use for full bottom end build / whipple ?
Looking for someone in east coast.. |
06-13-2020, 07:34 PM | #2 |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 904
|
I had a great experience with Tune Time Performance with my car, nothing by reliable afterwards.
https://tunetimeperformance.com/
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
06-13-2020, 08:34 PM | #3 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,490
|
Although not a full bottom end, my Magnuson setup was done by Jannetty Racing in CT and they did not disappoint in any way, both the installation and the tune were spot on.
Later when I went back for a retune for the larger LT5 throttle body, despite the job being pretty small, Ted still took the time to tweak the tune on the street with me to make sure I was fine with the throttle response before letting me take the car. They aren't cheap, but they know what they're doing, plus I got exemplary customer service each time, even when just emailing one random question after another, well before spending a dime with them.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
06-13-2020, 09:10 PM | #4 |
Drives: Black 2019 ZL1 M6, Join Date: Sep 2019
Location: Georgia
Posts: 322
|
East coast = Vengance racing
__________________
2019 Black ZL1, M6, CF Hood and Dash, Nav System, ZL1 Addons rock guards and lift points, Michelin Pilot Sport 4S, DD Smoked Marker Lights, Ceramic window tint, Gtechniq 9yr ceramic coating. JL Audio stealth box 12W6, Dyanamat trunk, Dead pedal cover, Soler TB/TC, Green Filter, Carbon-fiber Borla S-Type
|
06-14-2020, 12:58 AM | #5 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,363
|
Thanks guys
TTP = backed up crazy Jannety.= spoke to Ted n he wouldn’t take me in cause I bought my own parts .. “ not worth it for me to do your car for labor only” exact words Vengeance I’ll ask them |
06-15-2020, 08:50 AM | #6 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
RPM in Wilmington DE, camaros and corvettes all day, everyday.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
06-15-2020, 09:44 AM | #7 |
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 702
|
Frumusa Performance in Victor NY
CSP RPM
__________________
2016 Turbo Camaro SS - 800hp/900tq 9.7@146
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
06-15-2020, 10:31 AM | #8 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,363
|
Booked it up with Pray .. going to take the drive
|
06-15-2020, 12:15 PM | #9 |
Drives: 2017 Camaro 1SS M6 (SOLD) Join Date: Oct 2016
Location: 19518
Posts: 402
|
Nice choice!!! he will take great care of you.
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11
Stock: 416hp/427tq, 12.21 @ 116.80 Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft. Tuned by EFX Tuning 688hp/632tq Best 1/4 to date: 10.705 @ 131.92 |
06-15-2020, 06:39 PM | #10 |
Drives: 2019 2SS 1LE Join Date: Apr 2020
Location: Manalapan, NJ
Posts: 92
|
The Facebook 1LE guys love Pray. Let us know how it works out for you! I'm thinking of having some parts done with them at some point.
|
06-17-2020, 09:30 AM | #11 |
Drives: SS-6-SPD Join Date: Jan 2017
Location: New Jersey
Posts: 1,363
|
^ I have heard nothing but positive reviews about him.
I actually have his MSD / 95MM works great. Dropping the car end of the month should take 6 weeks or so to finish. Will update the thread after I get her back. Only issue with pray.. he’s super busy!!! So takes while to respond and his lead times may be slightly longer than others .. |
|
|
Post Reply
|
Thread Tools | |
|
|