Jannetty Racing Professional Remote Calibration services - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 12-04-2022, 08:47 AM

Modifying your car?

Then you need Professional Calibration services from Jannetty Racing.

Have or need a Tuning Device?

https://jannettyracing.com/collectio...uning-packages

Anything from a Cold air kit to 1000+ Horsepower builds, JRE is your source for professional calibration services both Remotely and at our headquarters in Waterbury CT.

Calibration services for N/A builds, Performance cams, Superchargers, Turbos, Torque converters, built transmissions, Gear ratio, and tire changes.

We do not calibrate for NOS systems, that is up to the owner, as there is too much risk of engine failure and it's always the tuners fault LOL.

We do not support or offer Pop, burble, backfire, car show nonsense.

Instructions can be found here for HPtuners, SCT.

https://jannettyracing.com/pages/jan...g-instructions

https://jannettyracing.com/pages/jan...e-instructions

We also support Diablosport please email me directly for instruction, tedj@jannnettyracing.com

Any questions please ask, I will be happy to help.

Ted.

JANNETTYRACING · 02-09-2023, 11:16 AM

We have now sold out of MPVI2s and are stocking the MPVI3 as well as Prolink cables.

JGaschTT · 04-18-2023, 11:15 AM

I am getting to the end of finishing my car and looking for a tuner. It is a 2010 Camaro with a Texas speed 416 stroker kit, AGP Twin 68s, and a 4l80e. It is a drag and drive focused car and I have a holley dominator and a gateway to be able to use stock ecu and the holley together. I am going to run stock ecu for a little bit and wondering if you tune cars like mine.

JANNETTYRACING · 04-18-2023, 11:30 AM

Quote:

Originally Posted by JGaschTT

I am getting to the end of finishing my car and looking for a tuner. It is a 2010 Camaro with a Texas speed 416 stroker kit, AGP Twin 68s, and a 4l80e. It is a drag and drive focused car and I have a holley dominator and a gateway to be able to use stock ecu and the holley together. I am going to run stock ecu for a little bit and wondering if you tune cars like mine.

I can certainly handle tuning the Stock ECM remotely.

However I do not tune Holley remotely only in person here on my dyno.

JANNETTYRACING · 05-10-2023, 11:55 AM

SCT tuning instructions as well

https://jannettyracing.com/pages/jan...e-instructions

scottm078 · 06-05-2023, 03:38 PM

I am on a tight budget (aren’t we all). I have a 2013 camaro ss with the 1le package. I’m going to be getting an Lsa kit for it. I also plan on putting in a ls9 cam and headers. I see you offer the aem a/f gauge package for the remote tuning for both sct and hp tuners. My question is what one do you prefer. Or does it not matter. Car will be a daily, not worried about what it will put down I just want it reliable.

JANNETTYRACING · 06-05-2023, 04:05 PM

Quote:

Originally Posted by scottm078

I am on a tight budget (aren’t we all). I have a 2013 camaro ss with the 1le package. I’m going to be getting an Lsa kit for it. I also plan on putting in a ls9 cam and headers. I see you offer the aem a/f gauge package for the remote tuning for both sct and hp tuners. My question is what one do you prefer. Or does it not matter. Car will be a daily, not worried about what it will put down I just want it reliable.

I can get perfect results with either HPtuners or SCT.

HPtuners has some advantages for user friendly stuff.

Feel free to call with any questions. 203-753-7223

JANNETTYRACING · 11-08-2023, 09:03 AM

The Other guy

Infidel67 · 11-08-2023, 09:53 AM

Really tempting especially from you guys, I had my Tune done by some backwoods Dude with a Dyno, Pm me with a $$ please for a remote tune with everything that's needed.

JANNETTYRACING · 11-08-2023, 10:23 AM

Quote:

Originally Posted by Detleg

Really tempting especially from you guys, I had my Tune done by some backwoods Dude with a Dyno, Pm me with a $$ please for a remote tune with everything that's needed.

Thank you, No need for PM all pricing is public on my web site here

https://jannettyracing.com/collectio...uning-packages

Infidel67 · 11-08-2023, 10:49 AM

Quote:

Originally Posted by JANNETTYRACING

Thank you, No need for PM all pricing is public on my web site here

https://jannettyracing.com/collectio...uning-packages

Gotcha... I'll be in touch

Infidel67 · 11-08-2023, 02:38 PM

Quote:

Originally Posted by JANNETTYRACING

Thank you, No need for PM all pricing is public on my web site here

https://jannettyracing.com/collectio...uning-packages

Well maybe it's me but it's not obvious what exactly I need, I don't have the Tuner Flasher, Data logging or any other Hardware, and how many added tunes would I need? 1, 2 or 3 @ $55 ??
it would be way over $1k

JANNETTYRACING · 11-08-2023, 03:50 PM

Quote:

Originally Posted by Detleg

Well maybe it's me but it's not obvious what exactly I need, I don't have the Tuner Flasher, Data logging or any other Hardware, and how many added tunes would I need? 1, 2 or 3 @ $55 ??
it would be way over $1k

Feel free to call my sales team they will get you straight. 203-753-7223

Sales@Phastek · 11-10-2023, 03:14 PM

You will not get better tunes and support, than Jannetty Racing.

12-04-2022, 08:47 AM	#1
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,225	Jannetty Racing Professional Remote Calibration services Modifying your car? Then you need Professional Calibration services from Jannetty Racing. Have or need a Tuning Device? https://jannettyracing.com/collectio...uning-packages Anything from a Cold air kit to 1000+ Horsepower builds, JRE is your source for professional calibration services both Remotely and at our headquarters in Waterbury CT. Calibration services for N/A builds, Performance cams, Superchargers, Turbos, Torque converters, built transmissions, Gear ratio, and tire changes. We do not calibrate for NOS systems, that is up to the owner, as there is too much risk of engine failure and it's always the tuners fault LOL. We do not support or offer Pop, burble, backfire, car show nonsense. Instructions can be found here for HPtuners, SCT. https://jannettyracing.com/pages/jan...g-instructions https://jannettyracing.com/pages/jan...e-instructions We also support Diablosport please email me directly for instruction, tedj@jannnettyracing.com Any questions please ask, I will be happy to help. Ted. __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

02-09-2023, 11:16 AM	#2
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,225	We have now sold out of MPVI2s and are stocking the MPVI3 as well as Prolink cables. __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

04-18-2023, 11:15 AM	#3
JGaschTT Drives: TT 2010 SS Camaro,Stock 2010 Camaro Join Date: Feb 2022 Location: Midland Tx Posts: 10	Tuning Drag Cars I am getting to the end of finishing my car and looking for a tuner. It is a 2010 Camaro with a Texas speed 416 stroker kit, AGP Twin 68s, and a 4l80e. It is a drag and drive focused car and I have a holley dominator and a gateway to be able to use stock ecu and the holley together. I am going to run stock ecu for a little bit and wondering if you tune cars like mine. __________________ 2010 2SS-Texas Speed 416ci Stroker Kit, Jakes Stage 4 4L80e with D3 Transbrake, AGP TT 6865 BB, BTR Stage 3 TT Cam, AGP Triple Walhbro 450s, AFR 260cc Heads, ID1300x Injectors, BMR Racing Suspension, BMR 15 Inch Conversion. Hoping for 1000+ and running 8.50 in the 1/4mile.

05-10-2023, 11:55 AM	#5
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,225	SCT tuning instructions as well https://jannettyracing.com/pages/jan...e-instructions __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

11-08-2023, 09:03 AM	#8
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,225	The Other guy __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

06-05-2023, 03:38 PM	#6
scottm078 Drives: 2013 Camaro ss 1le Join Date: Jun 2022 Location: New Hampshire Posts: 17	I am on a tight budget (aren’t we all). I have a 2013 camaro ss with the 1le package. I’m going to be getting an Lsa kit for it. I also plan on putting in a ls9 cam and headers. I see you offer the aem a/f gauge package for the remote tuning for both sct and hp tuners. My question is what one do you prefer. Or does it not matter. Car will be a daily, not worried about what it will put down I just want it reliable.

11-08-2023, 09:53 AM	#9
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 854 View My Garage	Really tempting especially from you guys, I had my Tune done by some backwoods Dude with a Dyno, Pm me with a $$ please for a remote tune with everything that's needed. __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-10-2023, 03:14 PM	#14
Sales@Phastek Drives: 2016 1SS Join Date: Apr 2012 Location: Houston, TX Posts: 3,817	You will not get better tunes and support, than Jannetty Racing. __________________