04-26-2019, 11:31 AM | #141 | |
Yee-aay-ee!
Drives: 2015 2SS/RS CV CE Join Date: Nov 2015
Location: ORegon
Posts: 2,520
|
Quote:
__________________
|
|
04-26-2019, 12:08 PM | #142 | |
1st time camarien
Drives: 2016 RS 2LT Convertible Join Date: Nov 2018
Location: New Jersey
Posts: 17
|
Quote:
XD Series Wheels XD811 Rockstar II - Matte Black/Accents XD Series Wheels XD811 Rockstar II - Matte Black/Accents By XD Series Wheels XD Series Wheels 20x10 Bolt Pattern: 5x4.5 | 5x114.3 | 5x4.72 | 5x120 - Offset: -24 mm MPN: XD81121017724N 2 $214.20 $428.40 XD Series Wheels XD811 Rockstar II - Matte Black/Accents XD Series Wheels XD811 Rockstar II - Matte Black/Accents By XD Series Wheels XD Series Wheels 20x9 Bolt Pattern: 5x4.5 | 5x114.3 | 5x4.72 | 5x120 - Offset: 18 mm MPN: XD81129017718 2 $306.00 $612.00
__________________
Be nice, Be Safe.
|
|
04-26-2019, 12:18 PM | #143 | |
Yee-aay-ee!
Drives: 2015 2SS/RS CV CE Join Date: Nov 2015
Location: ORegon
Posts: 2,520
|
Quote:
__________________
|
|
04-26-2019, 03:23 PM | #144 | |
1st time camarien
Drives: 2016 RS 2LT Convertible Join Date: Nov 2018
Location: New Jersey
Posts: 17
|
Quote:
But if the measurements are all good why would it not fit? Yes I know the are primarily a truck wheel, but I have seen some cars with dc rockstars on, including a couple of older 5th gens.. Sent from my iPhone using Tapatalk
__________________
Be nice, Be Safe.
|
|
04-26-2019, 04:05 PM | #145 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
The front 20x9 will work.
The 20x10 saus -24 offset. It should be +24
__________________
|
04-26-2019, 07:26 PM | #146 | |
1st time camarien
Drives: 2016 RS 2LT Convertible Join Date: Nov 2018
Location: New Jersey
Posts: 17
|
Quote:
Gotcha, ok thx guys. Sent from my iPhone using Tapatalk
__________________
Be nice, Be Safe.
|
|
05-07-2019, 11:11 PM | #147 | |
The Green Hornet
Drives: 2020 Rally Green 2SS 1LE Join Date: Apr 2019
Location: San Jose
Posts: 351
|
Quote:
|
|
05-08-2019, 01:12 AM | #148 | |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
Quote:
I cannot answer that question....but the Member that posted that picture has not been on since then. Almost 3 years ago. Don't think he will answer.
__________________
|
|
05-14-2019, 01:19 PM | #149 |
05-14-2019, 04:16 PM | #150 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
MRR Wheels Project 17......
One our most popular wheels for the Camaro platform has been our Flow forged M017 Model which on our release date we knew it was a winner, the concavity profile and finish just made the wheel to what it is today. for this reason we decided to play around a little with some near future projects.
Here is a sneak peak at what we have been working on, keep in mind this is what one would call a rough draft but like always we would like to get your thoughts and opinions. Group buy will be available. MRR Wheels 2pc Forged project Model DP17 available sizes 19", 20" available width 8.5,9.5,10,10.5,11,11.5,12 Custom finishes Direct OE bores and Hardware acceptance Available lip configurations Straight Lip and Step Lip |
05-14-2019, 07:33 PM | #151 |
IMO, the Goodyears are a much better tire for the track or for any other time. They’re significantly better.
__________________
2010 2SS Camaro (sold) 2010 ZL 427 Camaro (sold) 2012 ZL-1 Camaro (sold) 2018 ZL-1 Camaro |
|
07-05-2019, 05:58 PM | #152 |
Drives: 99 M3, 04 STi, 16 2SS Join Date: Oct 2016
Location: CT
Posts: 187
|
Hey Guys,
Thought I would post a quick tip here for those of you considering a wide 19" setup on an SS with MRC (mine is a '16). I just installed Apex SM-10 wheels that are 19x11 et44 and 19x10 et25. I am running MPSS tires in 325/30 and 285/35 respectively. I am reasonably sure that the drivers side rear is very slightly rubbing in the usual area. I took it for a 10 min drive and did a quick visual afterwards. If it's rubbing, it's subtle but I am not going to chance it will relocate the harness. Otherwise no issues with the rear. Tires are more or less even with the quarter panel, maybe 1mm of poke. Hard to say. Looks pretty even to me. The front rim edges are really close to the struts. I'd estimate maybe 2-3mm of clearance. I have seen a couple guys that have notched the sheet metal of the strut to get a little more clearance. That having been said, I don't think it's necessary in my case since this positioning will not change with driving. The tire is fairly close to the strut as well but seems to be fine. No rubbing lock to lock. I think the fronts may have a tiny bit more poke than the rears but they are really close to even with the fenders. |
07-06-2019, 09:06 AM | #153 |
Come on brother, no pictures!!!
__________________
2010 2SS Camaro (sold) 2010 ZL 427 Camaro (sold) 2012 ZL-1 Camaro (sold) 2018 ZL-1 Camaro |
|
07-06-2019, 09:12 AM | #154 | |
Fine wheel
Quote:
I believe the gold wheel in your sig is one of the finest that I’ve seen. I’d love to run them on my black ZL1. What are they if you don’t mind?
__________________
2010 2SS Camaro (sold) 2010 ZL 427 Camaro (sold) 2012 ZL-1 Camaro (sold) 2018 ZL-1 Camaro |
||
|
|
Post Reply
|
|
|