![]() |
#1 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
MT Street R Bias Ply. Have many had luck with these
I run the street R drag radial but haven't run the Bia R so wondered if anyone running them will hook their power. My Street R drag radials hooked my 850 rwhp 16 SS with a 2650 Maggie. These are a little narrower then the DR. I"m making just shy of 700 right now but want to keep the rolling drag pack light as possible and wanted to keep the side wall pliable and hopefully save the drive train some agony. Either running those or going back to another set of Hoosier 28x10-17.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,562
|
Both of my 4-link cars used bias ply slicks. Not sure if they work well on our cars, but my guess is no.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
![]() |
![]() |
![]() |
#3 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I ran Hoosiers on my 16 SS, NA and with 2300. Hooked good but 60ft times were slower then the Street R but just a 3 hundreds or so. I may end up with the 305 45 17 R. Just not sure yet.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
![]() |
![]() |
![]() |
#4 |
![]() Drives: 98 Camaro Join Date: Apr 2022
Location: MD
Posts: 274
|
I had them on my turbo c5. Honestly they drove around waaaaaaay too much for me. My buddy had them on his edelbrock supercharged coyote car and he said the same thing. Ended up running like 24-26psi in tires iirc and it was better but still not the best. They would literally drive you into the other lane.
|
![]() |
![]() |
![]() |
#5 | |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Quote:
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
![]() |
![]() |
|
|
Post Reply
|
|
|