Planted Technology looking for a 6th Gen Camaro

Richard0nee · 10-24-2016, 02:48 PM

If anyone is near Bellevue Washington, Planted Technology would like to borrow your 6th Gen Camaro for 3-4 days and in return you will get a seat bracket for free.

The brackets would be for aftermarket seats such as Sparco, Recaro, Cobra, etc. If you didn't know, Planted Technology is a huge supplier for major name brands such as Sparco, Recaro, etc.

Please call or email Planted for more information.

PLANTED TECHNOLOGY
Email:sales@plantedtechnology.com
Phone:425-747-9777

http://www.plantedtechnology.com/

AlwaysAmerican · 10-24-2016, 04:09 PM

I was going to to head up to Seattle in a few weeks, I can always trailer the car with me if you're not in a major rush or find someone else before hand?

Richard0nee · 10-24-2016, 04:14 PM

Quote:

Originally Posted by AlwaysAmerican

I was going to to head up to Seattle in a few weeks, I can always trailer the car with me if you're not in a major rush or find someone else before hand?

Ahh nice! Yeah just let planted or myself know? I'm trying to spread the word out for them.. Thanks!

pkssauce · 10-24-2016, 04:23 PM

I work in Bellevue, but don't plan on changing out my seats, nor can I live a few days without my car! Bummer.

6LE Designs · 10-25-2016, 03:36 AM

Are you guys going to figure out the wiring issues also (air bag lights, etc...)? Would love to sell them once you have them made...

BradfordCamaro · 10-25-2016, 05:21 AM

It would be good to make a adaptor for the stock rails to use a side mount. This will keep the SPS sensors intact.

Richard0nee · 10-25-2016, 09:15 AM

Quote:

Originally Posted by pkssauce

I work in Bellevue, but don't plan on changing out my seats, nor can I live a few days without my car! Bummer.

Richard0nee · 10-25-2016, 09:18 AM

Quote:

Originally Posted by 6LE Designs

Are you guys going to figure out the wiring issues also (air bag lights, etc...)? Would love to sell them once you have them made...

Planted wants to make a seat base for the 6th Gen. The seat base from the 5th Gen won't fit, one bolt is off line by a few milometers.

The airbag SRS light can be tricked with a a 2 ohm resistor according to some shops.

Richard0nee · 10-25-2016, 09:19 AM

Quote:

Originally Posted by BradfordCamaro

It would be good to make a adaptor for the stock rails to use a side mount. This will keep the SPS sensors intact.

Right? I agree.

What some shops can do also, is put the passenger seat occupancy sensor on the aftermarket seats. Or just put a resistor to the seatbelt light.

6LE Designs · 10-25-2016, 05:08 PM

Quote:

Originally Posted by BradfordCamaro

It would be good to make a adaptor for the stock rails to use a side mount. This will keep the SPS sensors intact.

Way easier said than done with the way the stock brackets are on the seat..

6LE Designs · 10-25-2016, 05:09 PM

Quote:

Originally Posted by Richard0nee

Planted wants to make a seat base for the 6th Gen. The seat base from the 5th Gen won't fit, one bolt is off line by a few milometers.

The airbag SRS light can be tricked with a a 2 ohm resistor according to some shops.

Where do you plug the resistor in though?

Richard0nee · 10-26-2016, 01:09 AM

Quote:

Originally Posted by 6LE Designs

Where do you plug the resistor in though?

Right into the plug that plugs into the seat. A friend of a friend did it on his 370Z and didn't have any problems. I spoke with SP Engineering in Hacienda Heights and they have done it multiple times.

6LE Designs · 10-26-2016, 11:13 PM

Quote:

Originally Posted by Richard0nee

Right into the plug that plugs into the seat. A friend of a friend did it on his 370Z and didn't have any problems. I spoke with SP Engineering in Hacienda Heights and they have done it multiple times.

Lol, I get that much... What I mean is, this car has a TON of wires under the seats and they ALL go into the same plug bulk head. Any clue on figuring out which wires?

Richard0nee · 10-26-2016, 11:37 PM

Quote:

Originally Posted by 6LE Designs

Lol, I get that much... What I mean is, this car has a TON of wires under the seats and they ALL go into the same plug bulk head. Any clue on figuring out which wires?

Haha I got you. Yeah I'll have to take a look. I'm just waiting for the bracket to be made and then figure out the resistors.. Spoke with Rad Industries and he wanted ~$400 a side to custom make a seat base.

Once I get the seat base, I'll figure out the proper resistor to arm the SRS airbags. SP Engineering mentioned that they have used the seat occupancy sensor from the OEM seats and put it on the aftermarket seats as well.

Hoping you guys can find some info too!

10-24-2016, 02:48 PM	#1
Richard0nee Drives: 2016 SS M6, NPP Join Date: Apr 2016 Location: Hawthorne, CA Posts: 1,957	Planted Technology looking for a 6th Gen Camaro If anyone is near Bellevue Washington, Planted Technology would like to borrow your 6th Gen Camaro for 3-4 days and in return you will get a seat bracket for free. The brackets would be for aftermarket seats such as Sparco, Recaro, Cobra, etc. If you didn't know, Planted Technology is a huge supplier for major name brands such as Sparco, Recaro, etc. Please call or email Planted for more information. PLANTED TECHNOLOGY Email:sales@plantedtechnology.com Phone:425-747-9777 http://www.plantedtechnology.com/ Last edited by Richard0nee; 10-24-2016 at 03:27 PM.

10-24-2016, 04:09 PM	#2
AlwaysAmerican Drives: 15 Silverado, 15 Corvette 2LT Z51 Join Date: Aug 2012 Location: Las Vegas Posts: 360	I was going to to head up to Seattle in a few weeks, I can always trailer the car with me if you're not in a major rush or find someone else before hand? __________________ 2016 Camaro 2SS Mosiac Black Aka-The Reaper Build Thread- http://www.camaro6.com/forums/showthread.php?t=440437

10-24-2016, 04:23 PM	#4
pkssauce Drives: 2016 Camaro 2SS Join Date: Oct 2015 Location: Seattle Posts: 535	I work in Bellevue, but don't plan on changing out my seats, nor can I live a few days without my car! Bummer. __________________ Ordered: 2SS Nightfall Gray, NPP, MRC, navi, auto, low gloss black wheels, black bowties TCFCB4 1000: 12/08/2015 2000: 12/08/2015 3000: 12/10/2015 3000: 12/12/2105 - TPW 1/11/2016 3100: 12/18/2015 - TPW 1/18/2016 3300: 12/23/2015 - TPW 1/11/2016 3400: 12/24/2015 3800: 01/19/2016 4300: 01/20/2016, 4200: 1/28/2016, 4300: 1/29/2016, 4B00: 1/30/2016, 4200: 2/7/2016 (train), 4800: 2/19/2016, 5000: 2/22/2016, 6000: 2/25/2016

10-25-2016, 05:21 AM	#6
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	It would be good to make a adaptor for the stock rails to use a side mount. This will keep the SPS sensors intact. __________________

10-25-2016, 03:36 AM	#5
6LE Designs Drives: 2016 Camaro 2SS Join Date: Jan 2016 Location: Valley Village, CA Posts: 636	Are you guys going to figure out the wiring issues also (air bag lights, etc...)? Would love to sell them once you have them made...

User Name		Remember Me?
Password