04-17-2020, 08:06 PM | #1 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
2017 ZL1 A10 Hyper Blue - 8k miles - ATL
Looking to sell my 2017 Camaro ZL1 in hyper blue metallic with the A10 auto trans with less than 8000 miles. Reason for the sale is I bought a new house and would like to do some projects to it and I'm impatient. Also the car mostly sits in the garage and only comes out for nice days, which aren't many during pollen season lately. Car has been paid off since the day I drove it off the lot in July 2017, clean/clear title in hand waiting for your signature.
Performance Mods: - Rotofab dry cold air intake - Tony Mamo ported LT4 throttle body - Elite Engineering E2X catch can - Car has never been tuned. It has been on a Dyno Dynamics dyno once BEFORE any mods and it put down 549rwhp and 540rwtq. I estimate now with the CAI and TB and being broken in it would make 580-600rwhp on a Dynojet. Exterior Mods: - Paint professionally polished - Xpel Ultimate self healing PPF full front end/side skirts/A-pillars/rear rockers/roof - Ceramic coating on the entire car - Diode Dynamics smoked LED side markers - Diode Dynamics license plate LED - Diode Dynamics trunk LED - Diode Dynamics reverse lights LEDs - GM smoked tail lights - GM smoked 3rd brake light - HERO smoked rear lower bumper reflectors - Seibon carbon fiber license plate frame - Llumar 35% ceramic tinted windows - Llumar Air80 UV tint on the windshield (can't even tell its there) - ZL1 Addons red anodized lift points Interior Mods: - GM ZL1 embroidered Floor mats (Adds 5HP) - Covercraft UV blocking sunshield In the interest of full disclosure there are a couple very minor issues with the car noted below: - Loading the car on a trailer for my move from Texas to Georgia the passenger side wheels got a tiny bit of curb rash on them. I called for a quote from a professional to fix and it was estimated to be less than $200 for a perfect match fix. - Small chip out of driver side skirt Xpel film at the back of the door from road debris. The PPF did it's job and protected the paint perfectly! Chip is less than the size of an eraser on a pencil. - Few scratches on the passenger side of the center console where the seat belt connector is. This was here when I bought the car and didn't notice until days later. - On the rear bottom corner of passenger seat there is threading coming undone from the factory, again not noticed at delivery. - MAF connector has a plastic tab broken off. Not a big deal as it has never come undone. As you can see these are just minor issues. No surprises here. I have multiple Blackstone Laboratories oil reports for interested buyers if they choose. Any questions at all please ask, I may have missed some things as I don't give the car the attention it deserves anymore. It's patiently awaiting its new owner to drive her home. $49,000 OBO Last edited by djfury05; 04-29-2020 at 04:58 PM. |
04-19-2020, 09:23 AM | #2 |
Drives: 2020 ZLE A10, 2018 F250 Diesel Join Date: Apr 2020
Location: Atlanta
Posts: 148
|
Nice car. Do you have any interior pictures? What part of Atlanta are you in?
|
04-27-2020, 10:32 AM | #3 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Bump.. will get some interior/engine bay pictures up shortly.
|
04-29-2020, 03:04 PM | #4 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
New pictures added of the engine bay/interior in the original post.
I have a current Carfax for the car and yesterday I went to a Chevy dealer and had a pre-purchase inspection performed with no issues. Today the car will get another oil change and a sample sent out to Blackstone again for 3 total samples. |
05-08-2020, 03:19 PM | #5 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Bump it up.. Beautiful car waiting for a new owner.
|
05-12-2020, 03:02 PM | #6 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
For interested buyers I do have some brand new uninstalled parts that may sweeten the deal.
- American Racing Headers 1 7/8" with off road H-pipe. Most people do a Y-pipe. ARH says the H-pipe will make the sound a bit deeper and muscle car like. From all the searching on the forums only 1 other guy has done this and there's no sound clips that I know of. - ATI super damper - Lingenfelter 15% lower pulley - 2 supercharger belts. A greenback HD belt and an RPM series belt - Spark plugs and wire sleeves None of this has ever been installed. If interested PM me. And NO, I will not separate the uninstalled parts from the car unless car sells without them. |
05-12-2020, 06:19 PM | #7 |
Drives: 2019 ZL1 Riverside Join Date: Apr 2020
Location: Charlotte, NC
Posts: 1,138
|
If you put those parts on and get a tune you will likely end up keeping her (620-640 rwhp)
Bump for good seller and great car |
05-19-2020, 09:54 AM | #8 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Bumppp.. $48,000 OBO.
|
05-19-2020, 02:15 PM | #9 |
#TeamBeckyD
Drives: 2017 HBM 2SS Convertible A8 Join Date: Aug 2008
Location: Apopka, FL
Posts: 10,496
|
dang too bad it has a sunroof GTWTS beautiful car.
__________________
#TeamBeckyD
**FIFTY HBM 2SS VERT** |
05-21-2020, 08:16 PM | #10 |
Drives: 2013 ZL1 Join Date: May 2020
Location: Blue Springs, MO.
Posts: 2
|
ZL1
Beautiful car, I'd like to talk to you about it. PM sent
|
05-29-2020, 11:48 AM | #11 |
Drives: 2017 ZL1 A10 Join Date: Jul 2014
Location: Atlanta, GA
Posts: 394
|
Sold.
|
|
|
Post Reply
|
|
|